[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Unable to find USRP
From: |
Berndt Josef Wulf |
Subject: |
Re: [Discuss-gnuradio] Unable to find USRP |
Date: |
Sun, 15 May 2005 09:11:45 +0930 |
User-agent: |
KMail/1.7.2 |
On Sunday 15 May 2005 03:32, Eric Blossom wrote:
> On Sat, May 14, 2005 at 06:41:04PM +0930, Berndt Josef Wulf wrote:
> > Ok, it's working again. I had to rebuild libusb after a kernel upgrade.
> > The usrp example script files run fine now. It seems to perform better
> > than previously. This prompted me to run the benchmark_usb.py script,
> > which unfortunately fails with the following message:
>
> OK.
>
> It's failing to open the control end point and can't load it's firmware.
>
> Perhaps it's some kind of file permission problem.
>
> A quick look at the bsd.c file from libusb-0.1.10a reveals that it
> tries to open files with names like these:
>
> /dev/usb*
> /dev/ugen*
>
> If this semi-informed guess doesn't work go to "Plan B".
>
> Plan B: run gdb on "usrper load_standard_bits" and step into the
> libusb code to figure out where it's really failing to open the cmd
> interface. [The libusb interface doesn't propagate much useful info
> up to the app when it can't open a device/endpoint.]
Plan A:
The permissions and they are fine.
Plan B:
/usr/pkg/bin/usrper load_standard_bits
executes without errors.
I ran ktruss on the benchmark.py script itself revealing that the ugen device
is busy when accessed. It appears that this device was opened prior and never
closed.
[...]
29861 python2p3 resume kernel
29861 python2p3 ioctl(0x3, _IOWR('U',0x6f,0x18), 0xbfbfdbb0) = 0
"address@hidden"
29861 python2p3 access("/usr/pkg/share/usrp/rev2/usrp_firmware.ihx", 0x4) = 0
29861 python2p3 open("/dev/ugen0.00", 0x2, 0xbd4be02f) Err#16 EBUSY
29861 python2p3 open("/dev/ugen0.00", 0, 0xbd4be02f) Err#16 EBUSY
29861 python2p3 issetugid() = 0
29861 python2p3 issetugid() = 0
29861 python2p3 open("/usr/share/nls/nls.alias.db", 0, 0) Err#2 ENOENT
29861 python2p3 open("/usr/share/nls/nls.alias", 0, 0xbfbfcc38) = 6
29861 python2p3 fcntl(0x6, 0x2, 0x1) = 0
29861 python2p3 __fstat13(0x6, 0xbfbfcc40) = 0
29861 python2p3 mmap(0, 0x5f0, 0x1, 0x2, 0x6, 0, 0, 0) = 0xbd452000
29861 python2p3 close(0x6) = 0
29861 python2p3 munmap(0xbd452000, 0x5f0) = 0
29861 python2p3 open("/usr/share/nls/C/libc.cat", 0, 0xbfbfcce8) = 6
29861 python2p3 __fstat13(0x6, 0xbfbfccd0) = 0
29861 python2p3 mmap(0, 0x105b, 0x1, 0x1, 0x6, 0, 0, 0) = 0xbd451000
29861 python2p3 close(0x6) = 0
29861 python2p3 munmap(0xbd451000, 0x105b) = 0
29861 python2p3 write(0x2, 0xbfbfd1d0, 0x32) = 50
"open_nth_cmd_interface: open_cmd_interface failed\n"
29861 python2p3 write(0x2, 0xbfbfd220, 0x4a) = 74
"usrp: failed to load firmware /usr/pkg/share/usrp/rev2/usrp_firmware."
29861 python2p3 break(0x83da000) = 0
29861 python2p3 break(0x83de000) = 0
29861 python2p3 break(0x83e1000) = 0
29861 python2p3 write(0x2, 0xbdbc0a00, 0x23) = 35
"Traceback (most recent call last):\n"
29861 python2p3 open("./benchmark_usb.py", 0, 0x1b6) = 6
29861 python2p3 write(0x2, 0xbfbfde50, 0x2c) = 44
" File "./benchmark_usb.py", line 106, in ?\n"
29861 python2p3 __fstat13(0x6, 0xbfbfd8d0) = 0
29861 python2p3 read(0x6, 0x83df000, 0x2000) = 3282
"#!/usr/bin/env python\n#\n# Copyright 2004,2005 Free Software Foundat"
29861 python2p3 write(0x2, 0xbdbb062e, 0x4) = 4
" "
[...]
This is similar to the problem I had with the audio device that doesn't permit
it to be opened by two or more processes, see the lines containing EBUSY. I
will try to figure out which part of benchmark_usb.py doesn't close the ugen
device.
The complete logfile is available on
ftp://ftp.netbsd.org/pub/NetBSD/misc/wulf/benchmark_usb.log
cheerio Berndt
--
Every man who says frankly and fully what he thinks is doing a public service.
[Leslie Stephen]
- Re: [Discuss-gnuradio] CVS compilation problem (actually a test fails), (continued)
- Re: [Discuss-gnuradio] CVS compilation problem (actually a test fails), matt . nottingham, 2005/05/02
- Re: [Discuss-gnuradio] CVS compilation problem (actually a test fails), Eric Blossom, 2005/05/02
- Re: [Discuss-gnuradio] CVS compilation problem (actually a test fails), Berndt Josef Wulf, 2005/05/02
- [Discuss-gnuradio] Unable to find USRP, Berndt Josef Wulf, 2005/05/13
- Re: [Discuss-gnuradio] Unable to find USRP, Eric Blossom, 2005/05/13
- Re: [Discuss-gnuradio] Unable to find USRP, Berndt Josef Wulf, 2005/05/13
- Re: [Discuss-gnuradio] Unable to find USRP, Eric Blossom, 2005/05/13
- Re: [Discuss-gnuradio] Unable to find USRP, Berndt Josef Wulf, 2005/05/14
- Re: [Discuss-gnuradio] Unable to find USRP, Eric Blossom, 2005/05/14
- Re: [Discuss-gnuradio] Unable to find USRP,
Berndt Josef Wulf <=
- Re: [Discuss-gnuradio] Unable to find USRP, Berndt Josef Wulf, 2005/05/14
- Re: [Discuss-gnuradio] Unable to find USRP, Eric Blossom, 2005/05/14
- Re: [Discuss-gnuradio] Unable to find USRP, Berndt Josef Wulf, 2005/05/17
- Re: [Discuss-gnuradio] Unable to find USRP, Eric Blossom, 2005/05/15
Re: [Discuss-gnuradio] CVS compilation problem (actually a test fails), n4hy, 2005/05/02
Re: [Discuss-gnuradio] CVS compilation problem (actually a test fails), Eric Blossom, 2005/05/02
Alternate list archive locations (was:Re: [Discuss-gnuradio] CVS compilation problem (actually a test fails)), Lamar Owen, 2005/05/02