[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] usrp2::rx_samples() failed when switching rx_path usi
[Discuss-gnuradio] usrp2::rx_samples() failed when switching rx_path using the latest git_trunk
Thu, 2 Sep 2010 15:39:19 +0200
What could be the reason for this error?
"usrp2: channel 0 not receiving
>From some previously post, Johnathan said that this should be fixed in
>releases after 3.2.2
I'm using the latest git trunk version, I've change the firmware (to
txrx_raw_eth_20100608.bin) and the fpga image (to u2_rev3-20100603.bin) (I am
using USRP2 + RFX2400). And the error still occur! Why?
My top_block basically contains a usrp2_sink and a usrp2_source block and a
rx_path and a tx_path. The rx_path and the tx_path are changed during runtime
with the following sequence:
The error occurs after a random number of switches of the different paths
(sometimes it works for 30 switches and sometimes just for 3) and the program
requires a restart to get rid of the problem.
- [Discuss-gnuradio] usrp2::rx_samples() failed when switching rx_path using the latest git_trunk,
Patrik Eliardsson <=