Re: Somewhere else someone else has problems with GORM

[Gregory John Casamento]

Good grief.   Sorry, it should only take a few minutes to install Gorm. :)

This seems like a package dependency issue with ports more than anything else.

Later, G.

 Gregory Casamento -- Principal Consultant - OLC, Inc 
# GNUstep Chief Maintainer


----- Original Message ----
From: Lars Sonchocky-Helldorf <lars.sonchocky-helldorf@hamburg.de>
To: GNUstep Discuss <discuss-gnustep@gnu.org>
Sent: Thursday, May 15, 2008 3:04:17 PM
Subject: Somewhere else someone else has problems with GORM

Forwarded Mails from macports-users@lists.macosforge.org:

Anfang der weitergeleiteten E-Mail:

> Von: Christopher Choi <chutsu@gmail.com>
> Datum: 8. Mai 2008 11:08:31 MESZ
> An: macports-users@lists.macosforge.org
> Betreff: Gorm taking ages to compile?
>
> Hi
> I'm went to install Gorm from the ports by issuing the command sudo  
> port
> install gorm...and it was going well until well its taking a whole  
> night to
> do it, and its still doing the compilation of Gcc42...
> I have a Titanium G4 1GHz with 1Gb RAM so would that explain why  
> its going
> so slowly? but I still don't get why installing Gorm an application  
> can take
> such a long time..
>
> this is what the compiling output is:
>
> Titan:~ Chris$ sudo port install gorm
> --->  Fetching expat
> --->  Attempting to fetch expat-2.0.1.tar.gz from
> http://downloads.sourceforge.net/expat
> --->  Verifying checksum(s) for expat
> --->  Extracting expat
> --->  Configuring expat
> --->  Building expat with target all
> --->  Staging expat into destroot
> --->  Installing expat 2.0.1_0
> --->  Activating expat 2.0.1_0
> --->  Cleaning expat
> --->  Fetching zlib
> --->  Attempting to fetch zlib-1.2.3.tar.bz2 from http://www.zlib.net/
> --->  Verifying checksum(s) for zlib
> --->  Extracting zlib
> --->  Applying patches to zlib
> --->  Configuring zlib
> --->  Building zlib with target all
> --->  Staging zlib into destroot
> --->  Installing zlib 1.2.3_1
> --->  Activating zlib 1.2.3_1
> --->  Cleaning zlib
> --->  Fetching freetype
> --->  Attempting to fetch freetype-2.3.5.tar.bz2 from
> http://download.savannah.gnu.org/releases/freetype/
> --->  Verifying checksum(s) for freetype
> --->  Extracting freetype
> --->  Applying patches to freetype
> --->  Configuring freetype
> --->  Building freetype with target all
> --->  Staging freetype into destroot
> --->  Installing freetype 2.3.5_1
> --->  Activating freetype 2.3.5_1
> --->  Cleaning freetype
> --->  Fetching libiconv
> --->  Attempting to fetch libiconv-1.12.tar.gz from
> http://ftp.gnu.org/gnu/libiconv
> --->  Verifying checksum(s) for libiconv
> --->  Extracting libiconv
> --->  Applying patches to libiconv
> --->  Configuring libiconv
> --->  Building libiconv with target all
> --->  Staging libiconv into destroot
> --->  Installing libiconv 1.12_0
> --->  Activating libiconv 1.12_0
> --->  Cleaning libiconv
> --->  Fetching fontconfig
> --->  Attempting to fetch fontconfig-2.5.0.tar.gz from
> http://fontconfig.org/release/
> --->  Verifying checksum(s) for fontconfig
> --->  Extracting fontconfig
> --->  Configuring fontconfig
> --->  Building fontconfig with target all
> --->  Staging fontconfig into destroot
> --->  Installing fontconfig 2.5.0_0+macosx
> --->  Activating fontconfig 2.5.0_0+macosx
> --->  Cleaning fontconfig
> --->  Fetching pkgconfig
> --->  Attempting to fetch pkg-config-0.23.tar.gz from
> http://pkg-config.freedesktop.org/releases/
> --->  Verifying checksum(s) for pkgconfig
> --->  Extracting pkgconfig
> --->  Configuring pkgconfig
> --->  Building pkgconfig with target all
> --->  Staging pkgconfig into destroot
> --->  Installing pkgconfig 0.23_0
> --->  Activating pkgconfig 0.23_0
> --->  Cleaning pkgconfig
> --->  Fetching xorg-util-macros
> --->  Attempting to fetch util-macros-1.1.5.tar.bz2 from
> http://www.x.org/pub/individual/util/
> --->  Verifying checksum(s) for xorg-util-macros
> --->  Extracting xorg-util-macros
> --->  Configuring xorg-util-macros
> --->  Building xorg-util-macros with target all
> --->  Staging xorg-util-macros into destroot
> --->  Installing xorg-util-macros 1.1.5_0
> --->  Activating xorg-util-macros 1.1.5_0
> --->  Cleaning xorg-util-macros
> --->  Fetching xorg-xproto
> --->  Attempting to fetch xproto-7.0.11.tar.bz2 from
> http://www.x.org/pub/individual/proto/
> --->  Verifying checksum(s) for xorg-xproto
> --->  Extracting xorg-xproto
> --->  Applying patches to xorg-xproto
> --->  Configuring xorg-xproto
> --->  Building xorg-xproto with target all
> --->  Staging xorg-xproto into destroot
> --->  Installing xorg-xproto 7.0.11_1
> --->  Activating xorg-xproto 7.0.11_1
> --->  Cleaning xorg-xproto
> --->  Fetching render
> --->  Attempting to fetch renderext-0.9.tar.bz2 from
> http://xlibs.freedesktop.org/release/
> --->  Verifying checksum(s) for render
> --->  Extracting render
> --->  Configuring render
> --->  Building render with target all
> --->  Staging render into destroot
> --->  Installing render 0.9_1
> --->  Activating render 0.9_1
> --->  Cleaning render
> --->  Fetching xrender
> --->  Attempting to fetch libXrender-0.9.0.tar.bz2 from
> http://xlibs.freedesktop.org/release/
> --->  Verifying checksum(s) for xrender
> --->  Extracting xrender
> --->  Configuring xrender
> --->  Building xrender with target all
> --->  Staging xrender into destroot
> --->  Installing xrender 0.9.0_2
> --->  Activating xrender 0.9.0_2
> --->  Cleaning xrender
> --->  Fetching Xft2
> --->  Attempting to fetch libXft-2.1.12.tar.bz2 from
> http://xorg.freedesktop.org/releases/individual/lib/
> --->  Verifying checksum(s) for Xft2
> --->  Extracting Xft2
> --->  Configuring Xft2
> --->  Building Xft2 with target all
> --->  Staging Xft2 into destroot
> --->  Installing Xft2 2.1.12_0
> --->  Activating Xft2 2.1.12_0
> --->  Cleaning Xft2
> --->  Fetching ncursesw
> --->  Attempting to fetch ncurses-5.6.tar.gz from
> http://ftp.gnu.org/gnu/ncurses
> --->  Verifying checksum(s) for ncursesw
> --->  Extracting ncursesw
> --->  Applying patches to ncursesw
> --->  Configuring ncursesw
> --->  Building ncursesw with target all
> --->  Staging ncursesw into destroot
> --->  Installing ncursesw 5.6_1
> --->  Activating ncursesw 5.6_1
> --->  Cleaning ncursesw
> --->  Fetching ncurses
> --->  Verifying checksum(s) for ncurses
> --->  Extracting ncurses
> --->  Applying patches to ncurses
> --->  Configuring ncurses
> --->  Building ncurses with target all
> --->  Staging ncurses into destroot
> --->  Installing ncurses 5.6_0
> --->  Activating ncurses 5.6_0
> --->  Cleaning ncurses
> --->  Fetching gettext
> --->  Attempting to fetch gettext-0.17.tar.gz from
> http://ftp.gnu.org/gnu/gettext
> --->  Verifying checksum(s) for gettext
> --->  Extracting gettext
> --->  Applying patches to gettext
> --->  Configuring gettext
> --->  Building gettext with target all
> --->  Staging gettext into destroot
> --->  Installing gettext 0.17_3
> --->  Activating gettext 0.17_3
> --->  Cleaning gettext
> --->  Fetching texinfo
> --->  Attempting to fetch texinfo-4.11.tar.bz2 from
> http://ftp.gnu.org/gnu/texinfo
> --->  Verifying checksum(s) for texinfo
> --->  Extracting texinfo
> --->  Configuring texinfo
> --->  Building texinfo with target all
> --->  Staging texinfo into destroot
> --->  Installing texinfo 4.11_0
> --->  Activating texinfo 4.11_0
> --->  Cleaning texinfo
> --->  Fetching aspell
> --->  Attempting to fetch aspell-0.60.6.tar.gz from
> http://ftp.gnu.org/gnu/aspell
> --->  Verifying checksum(s) for aspell
> --->  Extracting aspell
> --->  Configuring aspell
> --->  Building aspell with target all
> --->  Staging aspell into destroot
> --->  Installing aspell 0.60.6_0+macosx
> ******************************************************************
> You must install (at least) one of the language dictionaries after
> installing this port in order for it to work.
> ******************************************************************
> --->  Activating aspell 0.60.6_0+macosx
> --->  Cleaning aspell
> --->  Fetching gmp
> --->  Attempting to fetch gmp-4.2.2.tar.bz2 from http://ftp.gnu.org/ 
> gnu/gmp
> --->  Verifying checksum(s) for gmp
> --->  Extracting gmp
> --->  Configuring gmp
> --->  Building gmp with target all
> --->  Staging gmp into destroot
> --->  Installing gmp 4.2.2_1
> --->  Activating gmp 4.2.2_1
> --->  Cleaning gmp
> --->  Fetching mpfr
> --->  Attempting to fetch mpfr-2.3.1.tar.bz2 from
> http://www.mpfr.org/mpfr-2.3.1/
> --->  Verifying checksum(s) for mpfr
> --->  Extracting mpfr
> --->  Configuring mpfr
> --->  Building mpfr with target all
> --->  Staging mpfr into destroot
> --->  Installing mpfr 2.3.1_0
> --->  Activating mpfr 2.3.1_0
> --->  Cleaning mpfr
> --->  Fetching gcc42
> --->  Attempting to fetch gcc-core-4.2.3.tar.bz2 from
> ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ 
> gcc-4.2.3/
> --->  Attempting to fetch gcc-fortran-4.2.3.tar.bz2 from
> ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ 
> gcc-4.2.3/
> --->  Attempting to fetch gcc-g++-4.2.3.tar.bz2 from
> ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ 
> gcc-4.2.3/
> --->  Attempting to fetch gcc-java-4.2.3.tar.bz2 from
> ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ 
> gcc-4.2.3/
> --->  Attempting to fetch gcc-objc-4.2.3.tar.bz2 from
> ftp://ftp.funet.fi/pub/mirrors/sources.redhat.com/pub/gcc/releases/ 
> gcc-4.2.3/
> --->  Verifying checksum(s) for gcc42
> --->  Extracting gcc42
> --->  Configuring gcc42
> --->  Building gcc42 with target all
>
> So all is going well until this line showed up and is taking absolute
> age....what should I do? should I terminate it and try again?
> Thanks
> Chris
> _______________________________________________
> macports-users mailing list
> macports-users@lists.macosforge.org
> http://lists.macosforge.org/mailman/listinfo/macports-users
Anfang der weitergeleiteten E-Mail:

> Von: Ryan Schmidt <ryandesign@macports.org>
> Datum: 8. Mai 2008 12:36:34 MESZ
> An: Christopher Choi <chutsu@gmail.com>
> Kopie: macports-users@lists.macosforge.org
> Betreff: Re: Gorm taking ages to compile?
>
> On May 8, 2008, at 04:08, Christopher Choi wrote:
>
>> I'm went to install Gorm from the ports by issuing the command  
>> sudo port
>> install gorm...and it was going well until well its taking a whole  
>> night to
>> do it, and its still doing the compilation of Gcc42...
>> I have a Titanium G4 1GHz with 1Gb RAM so would that explain why  
>> its going
>> so slowly? but I still don't get why installing Gorm an  
>> application can take
>> such a long time..
>>
>> this is what the compiling output is:
>>
>> Titan:~ Chris$ sudo port install gorm
>
> [snip]
>
>> --->  Building gcc42 with target all
>>
>> So all is going well until this line showed up and is taking absolute
>> age....what should I do? should I terminate it and try again?
>
> gcc42 takes about 6 hours to compile on a 1.5 GHz PowerBook G4, so  
> on your 1 GHZ PowerBook G4 I would expect it to take about 9 hours.  
> You should also have at least 3GB of free hard drive space.
>
> I'm afraid gorm just has a lot of dependencies [1]. It will take  
> awhile to compile them all.
>
>
> [1] http://www.ryandesign.com/tmp/gorm.png
>
> _______________________________________________
> macports-users mailing list
> macports-users@lists.macosforge.org
> http://lists.macosforge.org/mailman/listinfo/macports-users



_______________________________________________
Discuss-gnustep mailing list
Discuss-gnustep@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnustep