[Dvdrtools-users] Problem w/ Pioneer DVR-105

[m.mohr]

Hi!

I'm having problems writing and DVD-RW with a DVR-105 on a Debian stable r1.

Scanbus output:

helium:~# dvdrecord -scanbus
dvdrtools v0.1.3
Portions (c) 2002-2003 Ark Linux <address@hidden>
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
scsibus0:
        0,0,0     0) 'JLMS    ' 'DVD-ROM LTD-165H' 'CH0U' Removable CD-ROM
        0,1,0     1) 'PIONEER ' 'DVD-RW  DVR-105 ' '1.00' Removable CD-ROM

I've tried to burn a DVD with:
dvdrecord -eject speed=2 -dev 1,0 -dao -v test.iso
which produced a DVD which I couldn't read with Linux or Windows.

The ISO was made with:
mkisofs -r -J -o test.iso /var/test/

Then I tried to blank the same DVD with:
dvdrecord -blank=all -v -dev 1,0

which resulted in this:
dvdrtools v0.1.3
Portions (c) 2002-2003 Ark Linux <address@hidden>
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-105 '
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Performing OPC...
Blanking entire disk
dvdrecord: Input/output error. blank unit: scsi sendcmd: no error
CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 06 B8 51 0E 00 00 00 00 51 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x51 Qual 0x00 (erase failure) Fru 0x0
Sense flags: Blk 440401 (not valid)
cmd finished after 749.441s timeout 9600s
dvdrecord: Cannot blank disk, aborting.

The DVD is from Intenso.


So what went wrong?

thanks for your help
markus