Re: [Dvdrtools-users] Problem w/ Pioneer DVR-105

[Robert M. Stockmann]

On Thu, 20 Feb 2003, m.mohr wrote:

> Hi!
> 
> I'm having problems writing and DVD-RW with a DVR-105 on a Debian stable r1.
> 
> Scanbus output:
> 
> helium:~# dvdrecord -scanbus
> dvdrtools v0.1.3
> Portions (c) 2002-2003 Ark Linux <address@hidden>
> Based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> Linux sg driver version: 3.1.22
> Using libscg version 'schily-0.5'
> scsibus0:
>         0,0,0     0) 'JLMS    ' 'DVD-ROM LTD-165H' 'CH0U' Removable CD-ROM
>         0,1,0     1) 'PIONEER ' 'DVD-RW  DVR-105 ' '1.00' Removable CD-ROM
> 
> I've tried to burn a DVD with:
> dvdrecord -eject speed=2 -dev 1,0 -dao -v test.iso
> which produced a DVD which I couldn't read with Linux or Windows.
> 
> The ISO was made with:
> mkisofs -r -J -o test.iso /var/test/
> 
> Then I tried to blank the same DVD with:
> dvdrecord -blank=all -v -dev 1,0
> 
> which resulted in this:
> dvdrtools v0.1.3
> Portions (c) 2002-2003 Ark Linux <address@hidden>
> Based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '1,0'
> scsibus: 0 target: 1 lun: 0
> Linux sg driver version: 3.1.22
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type    : Removable CD-ROM
> Version: 0
> Response Format: 2
> Capabilities:
> Vendor_info: 'PIONEER '
> Identifikation: 'DVD-RW  DVR-105 '
> Revision: '1.00'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags   : SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Drive buf size : 1605632 = 1568 KB
> Current Secsize: 2048
>   ATIP start of lead in:  -150 (00:00/00)
> Disk type:    unknown
> Manuf. index: -1
> Manufacturer: unknown (not in table)
> Starting to write CD/DVD at speed 1 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds. Operation starts.
> Performing OPC...
> Blanking entire disk
> dvdrecord: Input/output error. blank unit: scsi sendcmd: no error
> CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 03 00 06 B8 51 0E 00 00 00 00 51 00 00 00
> Sense Key: 0x3 Medium Error, Segment 0
> Sense Code: 0x51 Qual 0x00 (erase failure) Fru 0x0
> Sense flags: Blk 440401 (not valid)
> cmd finished after 749.441s timeout 9600s
> dvdrecord: Cannot blank disk, aborting.
> 
> The DVD is from Intenso.

Maybe you can do the same procedure with the Pioneer DVD-RW 2x recordable
which should be included in the box in which you bought your Pioneer DVR-A05
with. That recordable should work without problems with your A05 as a 
reference.


Robert
-- 
Robert M. Stockmann - RHCE
Network Engineer - UNIX Consultant
crashrecovery.org  address@hidden