[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Initialization failed (11) for T230 + DCU-11

From: Pawel Kot
Subject: Re: Initialization failed (11) for T230 + DCU-11
Date: Wed, 23 May 2007 19:30:28 +0200


On 5/22/07, munsoar <address@hidden> wrote:

According to
this page  gnokii shall work fine with T230 and DCU-11.

But I have some problem when I try to verify that everything is correct by
using gnokii --identify and get the following output:

GNOKII Version 0.6.14
LOG: debug mask is 0x1
phone instance config:
model: AT
port_device: /dev/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 9600
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
Message sent: 0x00 / 0x0005

There is completly no answer from the phone. You may be using
incorrect port or whatever.

take care,
Pawel Kot

reply via email to

[Prev in Thread] Current Thread [Next in Thread]