gpsd-dev
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Quectel FW version - Merge Request


From: Gary E. Miller
Subject: Re: Quectel FW version - Merge Request
Date: Wed, 9 Mar 2022 16:16:37 -0800

Yo Jared!

On Wed, 9 Mar 2022 15:24:30 +0000
Jared Hagel <jared.hagel@vontas.com> wrote:

> > Notice I started gpsd without the "-n".  So the initialization
> > happnes after gpspipe starts to run.  
> 
> Thanks for the tip 😊 Attached is raw output from my testing -
> data.raw.

Looks good, thankd.  It would be easier if they just sent me a sample part...

> How do you feed this back to GPSD - probably through
> gpspipe as well, correct? I haven't done this myself yet, but the raw
> output should be good.

Many ways to skin that catn but gpspipe is not one of them.  here is
my first choice:

$ gpsdecode -D 4 < data.raw

> > You need to rebase off current git.  
> 
> Done. New patch file attached.

Your diff was backwards.  The minus (-) was what you added.

$ patch -p 5 < /tmp/patch.diff 
patching file drivers/driver_nmea0183.c
Reversed (or previously applied) patch detected!  Assume -R? [n] y
$

Much better, marged, a few style things I'll fix.

You are throwing away 2/3rds of the info in $PQVERNO, I'll fix that too.

You overwrote subtype, which has good data from PMTK705, so I put the
$PQVERNO data in subtype1.

I added your data.raw as a regression test.

> > Lack of doc is always a show stopper for gpsd.  But, if you can
> > figure out what the message contains, then add comments in your
> > code to document it.  How many fields, what is in each field, what
> > Quectel model you see it in.  
> 
> Documentation for this command was provided to me by Quectel support.
> I added this documentation to the comments in the
> 'processQuectelFWVersion' function.

Good.

> > I guess I was unclear.
> >Check it is empty before requeting it again.  Not checking after the
> >duplicate requests are sent.  
> 
> I think I got it this time.

Yup.
 
> I tried to create another merge request by sending an email, but I
> was rejected again.

Email to the list?  How do you even do that?

> I tried by going through this webpage -
> https://gitlab.com/gpsd/gpsd/-/merge_requests. I'm likely doing
> something wrong.

I think I have to add you to the developer list.  I sent you and invite
for that.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        gem@rellim.com  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

Attachment: pgpKLRXetJXaC.pgp
Description: OpenPGP digital signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]