[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Enabling GALILEO after gpsd has automatically started
From: |
Gary E. Miller |
Subject: |
Re: Enabling GALILEO after gpsd has automatically started |
Date: |
Thu, 14 Jan 2021 10:29:36 -0800 |
Yo Florian!
On Thu, 14 Jan 2021 15:58:08 +0100
Florian Kiera <florian.kiera@logicway.de> wrote:
> ubxtool -p RESET -P XX resets the settings to the default settings of
> the firmware or what exactly do you mean? Once you have enabled
> Galileo for a single time it should remain using Galileo until you
> disable it (-d GALILEO) or reset it (-p RESET).
Assuming nothing else toiches it. Big assumption.
> If you simply ran
> ubxtool -p RESET -P 18.00
> ubxtool -e GALILEO -P 18.00
> and it still didn't saved the enable of Galileo after a reboot,
u-blox only saves things when your tell it to. And only if it can.
I guess I need to write a howto on u-blox saving. The topic is
quite complex.
> you
> could add an udev rule that runs the "ubxtool -e GALILEO -P 18.00"
> automatically.
udev is for hotplug. Run it before gpsd starts, or add a device hook
for gpsd to use.
> An output of "ubxtool -p STATUS -P 18.00" or "ubxtool -p CONFIG -P
> 18.00" could help too. I am not certain which does give out the
> available (enabled) satellites information but you should be able to
> tell once you tested it.
Documented here:
https://gpsd.io/ubxtool-examples.html#_constellations
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
gem@rellim.com Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgpG0mj_HL3kO.pgp
Description: OpenPGP digital signature
- Enabling GALILEO after gpsd has automatically started, David Taylor, 2021/01/13
- Re: Enabling GALILEO after gpsd has automatically started, Gary E. Miller, 2021/01/13
- Re: Enabling GALILEO after gpsd has automatically started, Gary E. Miller, 2021/01/14
- Re: Enabling GALILEO after gpsd has automatically started, David Taylor, 2021/01/15
- Re: Enabling GALILEO after gpsd has automatically started, Gary E. Miller, 2021/01/15
- Re: Enabling GALILEO after gpsd has automatically started, David Taylor, 2021/01/16
- Re: Enabling GALILEO after gpsd has automatically started, Gary E. Miller, 2021/01/16
- Re: Enabling GALILEO after gpsd has automatically started, Bernd Zeimetz, 2021/01/17