[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Honeycomb LX2 ARM board, problems booting Guix

From: Vagrant Cascadian
Subject: Re: Honeycomb LX2 ARM board, problems booting Guix
Date: Tue, 29 Jun 2021 15:57:31 -0700

On 2021-06-29, Christopher Baines wrote:
> I've had a Honeycomb LX2 board for a few weeks now, but I've been
> struggling to get Guix installed on it.
> The most success I've had is with an installer image written to either a
> USB drive or nVME drive. I changed the bootloader to the
> grub-efi-bootloader, using the efi-raw image type, a couple of other
> tweaks, but I only get as far as Linux starting Guile and then it
> promptly erroring [1].
> 1:
> For some reason, /proc/partitions is empty, and I can't see usual things
> relating to storage devices in /dev. Any ideas how this could happen,
> what might I be doing wrong, or anything else I could try?

Most likely missing kernel modules from the initrd, missing kernel
configuration options enabled, and/or missing support in the kernel

Hopefully it's one of the first two; good luck module/option hunting!

live well,

Attachment: signature.asc
Description: PGP signature

reply via email to

[Prev in Thread] Current Thread [Next in Thread]