[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: [Paparazzi-devel] Tiny v2

From: Uttam Chandrashekhar
Subject: Re: Re: [Paparazzi-devel] Tiny v2
Date: Sun, 6 Jan 2008 08:20:07 -0800 (PST)

Hi Martin,

Hmm, I'm already a member of the dialout group. I don't follow what you say about copying the 10-paparazzi.rules file? I did try this

sudo ./paparazzi

then when I entered my password and paparazzi center started, I loaded the MJ1 airframe and hit clean, then upload. NO errors! I'm not sure if that means it worked, here is what the last bit of info said:

make[1]: Leaving directory `/home/dcenterprises/paparazzi/paparazzi3/sw/airborne'
cd sw/airborne; make PAPARAZZI_SRC=/home/dcenterprises/paparazzi/paparazzi3 PAPARAZZI_HOME=/home/dcenterprises/paparazzi/paparazzi3 TARGET=ap upload
make[1]: Entering directory `/home/dcenterprises/paparazzi/paparazzi3/sw/airborne'
/home/dcenterprises/paparazzi/paparazzi3/sw/ground_segment/lpc21iap/lpc21iap  /home/dcenterprises/paparazzi/paparazzi3/var/MJ5/ap/ap.elf
Found USB device
BootROM code: 2.12
Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM)
BootLoader version: 1.3
Starting software at 0x00004000
make[1]: Leaving directory `/home/dcenterprises/paparazzi/paparazzi3/sw/airborne'
make: Leaving directory `/home/dcenterprises/paparazzi/paparazzi3'

But I did not see any LED's flashing :(

Did it succeed?


----- Original Message ----
From: "address@hidden" <address@hidden>
To: address@hidden
Sent: Sunday, January 6, 2008 8:56:19 PM
Subject: Re: Re: [Paparazzi-devel] Tiny v2

Hi Uttam,

for USB download as non root you need permission to access the "raw" USB
bus. You should be member of the dialout group and tell the system to
allow access copying the file "10-paparazzi.rules" as root from
$PAPARAZZI_HOME/conf/system/udev/rules/ to /etc/udev/rules.d


Paparazzi-devel mailing list

Looking for last minute shopping deals? Find them fast with Yahoo! Search.
reply via email to

[Prev in Thread] Current Thread [Next in Thread]