[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] custom autopilots

From: Maikel Punie
Subject: Re: [Paparazzi-devel] custom autopilots
Date: Wed, 12 Jan 2011 16:10:59 +0100


well with doing this, we are not limited to the paparazzi boards

actually i was hoping to just reuse the paparazzi code, but run it on our own board, so we are not limited to the paparazzi boards.


On Wed, Jan 12, 2011 at 15:57, Reto Büttner <address@hidden> wrote:
Hi Maikel,

do you really want to re-invent all the stuff like serial gps chip,
gps parser, i2c IMU, wireless data modem and servo controller? It has
all been done in Paparazzi and is available open source. It is well
structured, soundly tested and has many features.

What added value are you expecting when you develop it yourself again?

Cheers, Reto

2011/1/12 Maikel Punie <address@hidden>:
> hey,
> we are a group of students working on some sort of uav,
> at the moment we are working with custom components,
> main controller board: foxboardLX
> serial (ttl level) gps chip (NMEA outpu)
> i2c IMU (9 degrees of freedom)
> ac4780 transceivers for comunications
> serial servo controller (polulu)
> at the moment we have the basics working,
> parsing gps data, communication channel from ground to aircraft to control
> the servos
> How hard would it be to adapt the paparazzi source to work on this custom
> board? where do we start for this?
> regards,
> Maikel
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]