[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Lisa m firmware upload problem help needed

From: Gerard Toonstra
Subject: Re: [Paparazzi-devel] Lisa m firmware upload problem help needed
Date: Wed, 3 Oct 2012 13:42:24 -0300

Is the black magic probe connected at the same time?  If so, try taking that out, I think I've seen the same
failure happen when both are connected.

If it's working when using "root", then it's not the boot wire issue. \

This is my lsusb -vvv :

Bus 003 Device 002: ID 1d50:600f OpenMoko, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1d50 OpenMoko, Inc.
  idProduct          0x600f
  bcdDevice            1.00
  iManufacturer           1 Transition Robotics Inc.
  iProduct                2 Lisa/M (Upgrade) V1.0
  iSerial                 3 LM2-151 35FFD9053256383354622143   
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           27
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass       254 Application Specific Interface
      bInterfaceSubClass      1 Device Firmware Update
      bInterfaceProtocol      2
      iInterface              4 @Internal Flash   /0x08000000/4*002Ka,124*002Kg
      Device Firmware Upgrade Interface Descriptor:
        bLength                             9
        bDescriptorType                    33
        bmAttributes                        9
          Will Detach
          Manifestation Intolerant
          Upload Unsupported
          Download Supported
        wDetachTimeout                    255 milliseconds
        wTransferSize                    2048 bytes
        bcdDFUVersion                   1.1a
Device Status:     0x0000
  (Bus Powered)


ATTR{manufacturer}=="Transition Robotics Inc.", ATTR{product}=="Lisa/M (Upgrade)*", GROUP="plugdev"

refers to these lines:

  iManufacturer           1 Transition Robotics Inc.
  iProduct                2 Lisa/M (Upgrade) V1.0


On Wed, Oct 3, 2012 at 12:50 PM, Chris <address@hidden> wrote:
Hi and thank you very much for your time and help.
I am already a member of dialout and plugdev groups  but no luck.
I also checked the udev rules and everything is fine.
I know i may sound strange but i am a little frustrated with 12.04 LTS
I think Ubuntu 12.04 is a precise fail, too many problems with too many programs
like Eagle, the computer freezes  etc and i am not the only one...
I think i will revert back to 10.04 which is i think the best of all.

Try adding your user to the 'dialout' group and start a new login
process or just reboot.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]