|
From: | Christophe De Wagter |
Subject: | Re: [Paparazzi-devel] Lisa m firmware upload problem help needed |
Date: | Thu, 4 Oct 2012 09:49:03 +0200 |
Yesterday we uploaded an airframe file to the black magic probe.
Plug in black magic probe.
Default lisa-m2 (set for upload via USB).
Upload.
Did this never happen to anyone yet?
Is the black magic probe connected at the same time? If so, try taking that out, I think I've seen the same
failure happen when both are connected.
If it's working when using "root", then it's not the boot wire issue. \
This is my lsusb -vvv :
Bus 003 Device 002: ID 1d50:600f OpenMoko, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1d50 OpenMoko, Inc.
idProduct 0x600f
bcdDevice 1.00
iManufacturer 1 Transition Robotics Inc.
iProduct 2 Lisa/M (Upgrade) V1.0
iSerial 3 LM2-151 35FFD9053256383354622143
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 27
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 2
iInterface 4 @Internal Flash /0x08000000/4*002Ka,124*002Kg
Device Firmware Upgrade Interface Descriptor:
bLength 9
bDescriptorType 33
bmAttributes 9
Will Detach
Manifestation Intolerant
Upload Unsupported
Download Supported
wDetachTimeout 255 milliseconds
wTransferSize 2048 bytes
bcdDFUVersion 1.1a
Device Status: 0x0000
(Bus Powered)
This:
ATTR{manufacturer}=="Transition Robotics Inc.", ATTR{product}=="Lisa/M (Upgrade)*", GROUP="plugdev"
refers to these lines:
iManufacturer 1 Transition Robotics Inc.
iProduct 2 Lisa/M (Upgrade) V1.0
G>On Wed, Oct 3, 2012 at 12:50 PM, Chris <address@hidden> wrote:
Hi and thank you very much for your time and help.
I am already a member of dialout and plugdev groups but no luck.
I also checked the udev rules and everything is fine.
I know i may sound strange but i am a little frustrated with 12.04 LTS
I think Ubuntu 12.04 is a precise fail, too many problems with too many programs
like Eagle, the computer freezes etc and i am not the only one...
I think i will revert back to 10.04 which is i think the best of all.
Chris
Try adding your user to the 'dialout' group and start a new login
process or just reboot.
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |