[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Using 2 RC receivers on board

From: GalapagosUAV
Subject: Re: [Paparazzi-devel] Using 2 RC receivers on board
Date: Thu, 8 May 2014 16:08:52 -0500

Hello Chris,

Thank you for your reply. How does the Frsky ACCST system would help or replace 
a system with 2 receivers? I looked at their webpage but there is not much more 

I am currently using Futaba T8J 2.4GHz S-FHSS. I haven't had problems with my 
RC radios, however I would to be able to override the autopilot (I am using a 
YAPA2) in case of failure. 

Best Regards,

> On 08/05/2014, at 15:16, Chris <address@hidden> wrote:
> You don't need two, use the Frsky ACCST system (actually developed by ACT 
> Germany) and fly happily
> without problems.
> If you insist i think paparazzi autopilots can use two spectrum receivers 
> which personally i don't trust at all.
> Have a look in the wiki under Hardware -> autopilots
> Chris
>> On 05/08/2014 07:55 PM, GalapagosUAV wrote:
>> Dear all,
>> I would like to know if anyone has ever used 2 RC receivers on board for 
>> redundancy purposes? If yes, how can I do this? What I would like to do is 
>> while having one receiver connected to the autopilot via de PPM encoder, 
>> have another one that is not connected to autopilot but goes directly to the 
>> servos in case of autopilot failure.
>> Best Regards,
>> Jorge
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]