[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Using 2 RC receivers on board

From: Dylan Brunello
Subject: Re: [Paparazzi-devel] Using 2 RC receivers on board
Date: Sat, 10 May 2014 15:48:40 +1000


If your concern is that an issue with the autopilot will prevent you from switching to manual mode to take control of the aircraft then maybe a multiplexer is what you're after rather than two receivers. I haven't tried this so I'm not sure how well it works. You probably need to be careful setting it up so that autopilot doesn't get locked out if you lose rc signal. Maybe something like this will do the job:

Good luck,

On Friday, 9 May 2014, SilaS <address@hidden> wrote:
Hi Jorge,

I used this and worked well!"">

EMCOTEC so not cheap!


2014-05-08 18:55 keltezéssel, GalapagosUAV írta:
Dear all,

I would like to know if anyone has ever used 2 RC receivers on board for redundancy purposes? If yes, how can I do this? What I would like to do is while having one receiver connected to the autopilot via de PPM encoder, have another one that is not connected to autopilot but goes directly to the servos in case of autopilot failure.

Best Regards,
Paparazzi-devel mailing list

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]