[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] operation / flashing lisa/m

From: Oswald Berthold
Subject: Re: [Paparazzi-devel] operation / flashing lisa/m
Date: Tue, 10 Jun 2014 23:24:02 +0200
User-agent: mu4e; emacs 24.3.1

hey felix, thanks for that info, BMP sounds very promising.

because, and just anecdotally, when wanting to upload the baro change
(from the other thread) a few minutes ago, i promptly forgot to unplug
the UBEC resulting in the smell of very warm electronics. now lisa goes
into bootloader even when no USB is connected. fixing it with ADC2<->GND
now requires me to unplug two cables to be able to flash, yeah. ;)

bst, oswald

p.s. if anyone could think of what could have been blown by this mishap,
i'd be happy to hear that.

Felix Ruess writes:

> Hi Oswald,
> if you want to flash via USB bootloader, there is currently no way around
> this that I know of..
> But you could instead flash via JTAG or SWD (e.g. using FlossJTAG or
> BlackMagicProbe).
> I can really recommend the BlackMagicProbe, it's great for development and
> debugging.
> Cheers, Felix
> On Tue, Jun 10, 2014 at 12:08 PM, Oswald Berthold <
> address@hidden> wrote:
>> hi all again,
>> a few questions regarding flashing of the AP board:
>> flashing seems a bit awkward, the way i do it now is
>>  - unplug UBEC from servo ports
>>  - plug in micro USB
>>  - upload firmware
>>  - unplug USB
>>  - replug UBEC
>> is there a way of connecting both USB and external power supply to lisa?
>> i have the POWER_FROM_SERVO jumper closed. is there a way for getting
>> the AP into upload mode with a soft command, that is, go from normal
>> operation into bootloader mode?
>> regards, opt
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]