[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 1/8] target/mips: Move comment containing summar
From: |
Aleksandar Markovic |
Subject: |
Re: [Qemu-devel] [PATCH 1/8] target/mips: Move comment containing summary of CP0 registers |
Date: |
Tue, 8 Jan 2019 13:15:43 +0100 |
On Thursday, January 3, 2019, Aleksandar Markovic <
address@hidden> wrote:
> From: Aleksandar Markovic <address@hidden>
>
> Move comment containing summary of CP0 registers. Checkpatch
> script reported some tabs in the resutling diff, so convert
> these tabs to spaces too.
>
> Signed-off-by: Aleksandar Markovic <address@hidden>
> ---
> target/mips/cpu.h | 165 +++++++++++++++++++++++++++---
> ------------------------
> 1 file changed, 84 insertions(+), 81 deletions(-)
>
>
My original intention was moving a comment some 80 lines upwards, but git
interpreted that I wanted to move these 80 lines below the comment - hence
such strange diff, where no comment in question can be seen. The net result
is same, I don't have objection about that, except that it is very unclear
to reviewers.
Aleksandaer
> diff --git a/target/mips/cpu.h b/target/mips/cpu.h
> index 03c03fd..6c2a7e4 100644
> --- a/target/mips/cpu.h
> +++ b/target/mips/cpu.h
> @@ -123,87 +123,6 @@ typedef struct mips_def_t mips_def_t;
> #define MIPS_KSCRATCH_NUM 6
> #define MIPS_MAAR_MAX 16 /* Must be an even number. */
>
> -typedef struct TCState TCState;
> -struct TCState {
> - target_ulong gpr[32];
> - target_ulong PC;
> - target_ulong HI[MIPS_DSP_ACC];
> - target_ulong LO[MIPS_DSP_ACC];
> - target_ulong ACX[MIPS_DSP_ACC];
> - target_ulong DSPControl;
> - int32_t CP0_TCStatus;
> -#define CP0TCSt_TCU3 31
> -#define CP0TCSt_TCU2 30
> -#define CP0TCSt_TCU1 29
> -#define CP0TCSt_TCU0 28
> -#define CP0TCSt_TMX 27
> -#define CP0TCSt_RNST 23
> -#define CP0TCSt_TDS 21
> -#define CP0TCSt_DT 20
> -#define CP0TCSt_DA 15
> -#define CP0TCSt_A 13
> -#define CP0TCSt_TKSU 11
> -#define CP0TCSt_IXMT 10
> -#define CP0TCSt_TASID 0
> - int32_t CP0_TCBind;
> -#define CP0TCBd_CurTC 21
> -#define CP0TCBd_TBE 17
> -#define CP0TCBd_CurVPE 0
> - target_ulong CP0_TCHalt;
> - target_ulong CP0_TCContext;
> - target_ulong CP0_TCSchedule;
> - target_ulong CP0_TCScheFBack;
> - int32_t CP0_Debug_tcstatus;
> - target_ulong CP0_UserLocal;
> -
> - int32_t msacsr;
> -
> -#define MSACSR_FS 24
> -#define MSACSR_FS_MASK (1 << MSACSR_FS)
> -#define MSACSR_NX 18
> -#define MSACSR_NX_MASK (1 << MSACSR_NX)
> -#define MSACSR_CEF 2
> -#define MSACSR_CEF_MASK (0xffff << MSACSR_CEF)
> -#define MSACSR_RM 0
> -#define MSACSR_RM_MASK (0x3 << MSACSR_RM)
> -#define MSACSR_MASK (MSACSR_RM_MASK | MSACSR_CEF_MASK |
> MSACSR_NX_MASK | \
> - MSACSR_FS_MASK)
> -
> - float_status msa_fp_status;
> -
> -#define NUMBER_OF_MXU_REGISTERS 16
> - target_ulong mxu_gpr[NUMBER_OF_MXU_REGISTERS - 1];
> - target_ulong mxu_cr;
> -#define MXU_CR_LC 31
> -#define MXU_CR_RC 30
> -#define MXU_CR_BIAS 2
> -#define MXU_CR_RD_EN 1
> -#define MXU_CR_MXU_EN 0
> -
> -};
> -
> -typedef struct CPUMIPSState CPUMIPSState;
> -struct CPUMIPSState {
> - TCState active_tc;
> - CPUMIPSFPUContext active_fpu;
> -
> - uint32_t current_tc;
> - uint32_t current_fpu;
> -
> - uint32_t SEGBITS;
> - uint32_t PABITS;
> -#if defined(TARGET_MIPS64)
> -# define PABITS_BASE 36
> -#else
> -# define PABITS_BASE 32
> -#endif
> - target_ulong SEGMask;
> - uint64_t PAMask;
> -#define PAMASK_BASE ((1ULL << PABITS_BASE) - 1)
> -
> - int32_t msair;
> -#define MSAIR_ProcID 8
> -#define MSAIR_Rev 0
>
> /*
> * Summary of CP0 registers
> @@ -314,6 +233,90 @@ struct CPUMIPSState {
> * 7 TagLo TagHi KScratch<n>
> *
> */
> +
> +
> +typedef struct TCState TCState;
> +struct TCState {
> + target_ulong gpr[32];
> + target_ulong PC;
> + target_ulong HI[MIPS_DSP_ACC];
> + target_ulong LO[MIPS_DSP_ACC];
> + target_ulong ACX[MIPS_DSP_ACC];
> + target_ulong DSPControl;
> + int32_t CP0_TCStatus;
> +#define CP0TCSt_TCU3 31
> +#define CP0TCSt_TCU2 30
> +#define CP0TCSt_TCU1 29
> +#define CP0TCSt_TCU0 28
> +#define CP0TCSt_TMX 27
> +#define CP0TCSt_RNST 23
> +#define CP0TCSt_TDS 21
> +#define CP0TCSt_DT 20
> +#define CP0TCSt_DA 15
> +#define CP0TCSt_A 13
> +#define CP0TCSt_TKSU 11
> +#define CP0TCSt_IXMT 10
> +#define CP0TCSt_TASID 0
> + int32_t CP0_TCBind;
> +#define CP0TCBd_CurTC 21
> +#define CP0TCBd_TBE 17
> +#define CP0TCBd_CurVPE 0
> + target_ulong CP0_TCHalt;
> + target_ulong CP0_TCContext;
> + target_ulong CP0_TCSchedule;
> + target_ulong CP0_TCScheFBack;
> + int32_t CP0_Debug_tcstatus;
> + target_ulong CP0_UserLocal;
> +
> + int32_t msacsr;
> +
> +#define MSACSR_FS 24
> +#define MSACSR_FS_MASK (1 << MSACSR_FS)
> +#define MSACSR_NX 18
> +#define MSACSR_NX_MASK (1 << MSACSR_NX)
> +#define MSACSR_CEF 2
> +#define MSACSR_CEF_MASK (0xffff << MSACSR_CEF)
> +#define MSACSR_RM 0
> +#define MSACSR_RM_MASK (0x3 << MSACSR_RM)
> +#define MSACSR_MASK (MSACSR_RM_MASK | MSACSR_CEF_MASK |
> MSACSR_NX_MASK | \
> + MSACSR_FS_MASK)
> +
> + float_status msa_fp_status;
> +
> +#define NUMBER_OF_MXU_REGISTERS 16
> + target_ulong mxu_gpr[NUMBER_OF_MXU_REGISTERS - 1];
> + target_ulong mxu_cr;
> +#define MXU_CR_LC 31
> +#define MXU_CR_RC 30
> +#define MXU_CR_BIAS 2
> +#define MXU_CR_RD_EN 1
> +#define MXU_CR_MXU_EN 0
> +
> +};
> +
> +typedef struct CPUMIPSState CPUMIPSState;
> +struct CPUMIPSState {
> + TCState active_tc;
> + CPUMIPSFPUContext active_fpu;
> +
> + uint32_t current_tc;
> + uint32_t current_fpu;
> +
> + uint32_t SEGBITS;
> + uint32_t PABITS;
> +#if defined(TARGET_MIPS64)
> +# define PABITS_BASE 36
> +#else
> +# define PABITS_BASE 32
> +#endif
> + target_ulong SEGMask;
> + uint64_t PAMask;
> +#define PAMASK_BASE ((1ULL << PABITS_BASE) - 1)
> +
> + int32_t msair;
> +#define MSAIR_ProcID 8
> +#define MSAIR_Rev 0
> +
> /*
> * CP0 Register 0
> */
> --
> 2.7.4
>
>
>
- [Qemu-devel] [PATCH 8/8] target/mips: Update ITU to handle bus errors, (continued)
- [Qemu-devel] [PATCH 8/8] target/mips: Update ITU to handle bus errors, Aleksandar Markovic, 2019/01/03
- [Qemu-devel] [PATCH 6/8] target/mips: Add field and R/W access to ITU control register ICR0, Aleksandar Markovic, 2019/01/03
- [Qemu-devel] [PATCH 7/8] target/mips: Update ITU to utilize SAARI and SAAR CP0 registers, Aleksandar Markovic, 2019/01/03
- [Qemu-devel] [PATCH 5/8] target/mips: Provide R/W access to SAARI and SAAR CP0 registers, Aleksandar Markovic, 2019/01/03
- [Qemu-devel] [PATCH 1/8] target/mips: Move comment containing summary of CP0 registers, Aleksandar Markovic, 2019/01/03
- [Qemu-devel] [PATCH 2/8] target/mips: Add preprocessor constants for 32 major CP0 registers, Aleksandar Markovic, 2019/01/03
- [Qemu-devel] [PATCH 3/8] target/mips: Use preprocessor constants for 32 major CP0 registers, Aleksandar Markovic, 2019/01/03
- [Qemu-devel] [PATCH 4/8] target/mips: Add fields for SAARI and SAAR CP0 registers, Aleksandar Markovic, 2019/01/03
- Re: [Qemu-devel] [PATCH 0/8] target/mips: Update Inter-Thread Communication Unit support, no-reply, 2019/01/23