[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 08/14] tests: acpi: introduce an abilty start te
From: |
Laszlo Ersek |
Subject: |
Re: [Qemu-devel] [PATCH 08/14] tests: acpi: introduce an abilty start tests with UEFI firmware |
Date: |
Tue, 15 Jan 2019 21:18:18 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.9.1 |
On 01/15/19 16:41, Igor Mammedov wrote:
> For testcase to use UEFI firmware, one needs to provide and specify
> firmware and varstore blobs names in test_data { uefi_fl1, uefi_fl2) }
> fields respectively.
>
> Signed-off-by: Igor Mammedov <address@hidden>
> ---
> tests/bios-tables-test.c | 36 ++++++++++++++++++++++++++----------
> 1 file changed, 26 insertions(+), 10 deletions(-)
>
> diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
> index 8887319..d290dd2 100644
> --- a/tests/bios-tables-test.c
> +++ b/tests/bios-tables-test.c
> @@ -26,6 +26,8 @@
> typedef struct {
> const char *machine;
> const char *variant;
> + const char *uefi_fl1;
> + const char *uefi_fl2;
> uint64_t rsdp_addr;
> uint8_t rsdp_table[36 /* ACPI 2.0+ RSDP size */];
> GArray *tables;
> @@ -519,21 +521,35 @@ static void test_smbios_structs(test_data *data)
> static void test_acpi_one(const char *params, test_data *data)
> {
> char *args;
> -
> - /* Disable kernel irqchip to be able to override apic irq0. */
> - args = g_strdup_printf("-machine %s,accel=%s,kernel-irqchip=off "
> - "-net none -display none %s "
> - "-drive id=hd0,if=none,file=%s,format=raw "
> - "-device ide-hd,drive=hd0 ",
> - data->machine, "kvm:tcg",
> - params ? params : "", disk);
> + bool use_uefi = data->uefi_fl1 && data->uefi_fl2;
> +
> + if (use_uefi) {
> + args = g_strdup_printf("-machine %s,accel=%s -nodefaults -nographic "
> + "-drive if=pflash,format=raw,file=%s/%s,readonly "
> + "-drive if=pflash,format=raw,file=%s/%s,snapshot=on %s",
Today I Learned: about "snapshot=on". Thanks :) The command line looks good.
> + data->machine, "kvm:tcg", data_dir, data->uefi_fl1, data_dir,
You could open-code "kvm:tcg" in the format string at once (unless you
turn that into a parameter in a later patch in the series). But, I see
the pre-patch code passes "kvm:tcg" as an argument too.
> + data->uefi_fl2, params ? params : "");
> +
> + } else {
> + /* Disable kernel irqchip to be able to override apic irq0. */
> + args = g_strdup_printf("-machine %s,accel=%s,kernel-irqchip=off "
> + "-net none -display none %s "
> + "-drive id=hd0,if=none,file=%s,format=raw "
> + "-device ide-hd,drive=hd0 ",
> + data->machine, "kvm:tcg", params ? params : "", disk);
> + }
>
> data->qts = qtest_init(args);
>
> - boot_sector_test(data->qts);
> + if (use_uefi) {
> + data->rsdp_addr = uefi_find_rsdp_addr(data->qts,
> + 0x40000000ULL, 128ULL * 1024 * 1024);
I think open-coding the DRAM size is valid; after all, it depends on the
QEMU command line, and you control the QEMU command line above. However,
do we really want to open-code the DRAM base here? That's
board-specific. Should we pass that too through the "test_data" structure?
> + } else {
> + boot_sector_test(data->qts);
> + test_acpi_rsdp_address(data);
> + }
>
> data->tables = g_array_new(false, true, sizeof(AcpiSdtTable));
> - test_acpi_rsdp_address(data);
> test_acpi_rsdp_table(data);
> test_acpi_rxsdt_table(data);
> test_acpi_fadt_table(data);
>
Thanks,
Laszlo
- [Qemu-devel] [PATCH 03/14] tests: acpi: rename acpi_parse_rsdp_table() into acpi_fetch_rsdp_table(), (continued)
- [Qemu-devel] [PATCH 03/14] tests: acpi: rename acpi_parse_rsdp_table() into acpi_fetch_rsdp_table(), Igor Mammedov, 2019/01/15
- [Qemu-devel] [PATCH 05/14] tests: acpi: fetch X_DSDT if pointer to DSDT is 0, Igor Mammedov, 2019/01/15
- [Qemu-devel] [PATCH 04/14] tests: acpi: make pointer to RSDP 64bit, Igor Mammedov, 2019/01/15
- [Qemu-devel] [PATCH 06/14] tests: acpi: add reference blobs arm/virt board testcase, Igor Mammedov, 2019/01/15
- [Qemu-devel] [PATCH 07/14] tests: acpi: skip FACS table if board uses hw reduced ACPI profile, Igor Mammedov, 2019/01/15
- [Qemu-devel] [PATCH 08/14] tests: acpi: introduce an abilty start tests with UEFI firmware, Igor Mammedov, 2019/01/15
- Re: [Qemu-devel] [PATCH 08/14] tests: acpi: introduce an abilty start tests with UEFI firmware,
Laszlo Ersek <=
- [Qemu-devel] [PATCH 09/14] tests: acpi: move boot_sector_init() into x86 tests branch, Igor Mammedov, 2019/01/15
- [Qemu-devel] [PATCH 10/14] tests: acpi: ignore SMBIOS tests when UEFI firmware is used, Igor Mammedov, 2019/01/15
- Re: [Qemu-devel] [PATCH 10/14] tests: acpi: ignore SMBIOS tests when UEFI firmware is used, Laszlo Ersek, 2019/01/15
- Re: [Qemu-devel] [PATCH 10/14] tests: acpi: ignore SMBIOS tests when UEFI firmware is used, Igor Mammedov, 2019/01/16
- Re: [Qemu-devel] [PATCH 10/14] tests: acpi: ignore SMBIOS tests when UEFI firmware is used, Laszlo Ersek, 2019/01/16
- Re: [Qemu-devel] [PATCH 10/14] tests: acpi: ignore SMBIOS tests when UEFI firmware is used, Laszlo Ersek, 2019/01/16
- Re: [Qemu-devel] [PATCH 10/14] tests: acpi: ignore SMBIOS tests when UEFI firmware is used, Igor Mammedov, 2019/01/16
- Re: [Qemu-devel] [PATCH 10/14] tests: acpi: ignore SMBIOS tests when UEFI firmware is used, Laszlo Ersek, 2019/01/16