[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 18/52] target/arm: Factor out PMU register definitions
|
From: |
Peter Maydell |
|
Subject: |
[PULL 18/52] target/arm: Factor out PMU register definitions |
|
Date: |
Fri, 21 Feb 2020 13:07:06 +0000 |
Pull the code that defines the various PMU registers out
into its own function, matching the pattern we have
already for the debug registers.
Apart from one style fix to a multi-line comment, this
is purely movement of code with no changes to it.
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Reviewed-by: Richard Henderson <address@hidden>
Signed-off-by: Peter Maydell <address@hidden>
Message-id: address@hidden
---
target/arm/helper.c | 158 +++++++++++++++++++++++---------------------
1 file changed, 82 insertions(+), 76 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index ab36f33b719..cb2f4d8bbdb 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -6317,6 +6317,87 @@ static void define_debug_regs(ARMCPU *cpu)
}
}
+static void define_pmu_regs(ARMCPU *cpu)
+{
+ /*
+ * v7 performance monitor control register: same implementor
+ * field as main ID register, and we implement four counters in
+ * addition to the cycle count register.
+ */
+ unsigned int i, pmcrn = 4;
+ ARMCPRegInfo pmcr = {
+ .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
+ .access = PL0_RW,
+ .type = ARM_CP_IO | ARM_CP_ALIAS,
+ .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcr),
+ .accessfn = pmreg_access, .writefn = pmcr_write,
+ .raw_writefn = raw_write,
+ };
+ ARMCPRegInfo pmcr64 = {
+ .name = "PMCR_EL0", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 0,
+ .access = PL0_RW, .accessfn = pmreg_access,
+ .type = ARM_CP_IO,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
+ .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT),
+ .writefn = pmcr_write, .raw_writefn = raw_write,
+ };
+ define_one_arm_cp_reg(cpu, &pmcr);
+ define_one_arm_cp_reg(cpu, &pmcr64);
+ for (i = 0; i < pmcrn; i++) {
+ char *pmevcntr_name = g_strdup_printf("PMEVCNTR%d", i);
+ char *pmevcntr_el0_name = g_strdup_printf("PMEVCNTR%d_EL0", i);
+ char *pmevtyper_name = g_strdup_printf("PMEVTYPER%d", i);
+ char *pmevtyper_el0_name = g_strdup_printf("PMEVTYPER%d_EL0", i);
+ ARMCPRegInfo pmev_regs[] = {
+ { .name = pmevcntr_name, .cp = 15, .crn = 14,
+ .crm = 8 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7,
+ .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS,
+ .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn,
+ .accessfn = pmreg_access },
+ { .name = pmevcntr_el0_name, .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 8 | (3 & (i >> 3)),
+ .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access,
+ .type = ARM_CP_IO,
+ .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn,
+ .raw_readfn = pmevcntr_rawread,
+ .raw_writefn = pmevcntr_rawwrite },
+ { .name = pmevtyper_name, .cp = 15, .crn = 14,
+ .crm = 12 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7,
+ .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS,
+ .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn,
+ .accessfn = pmreg_access },
+ { .name = pmevtyper_el0_name, .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 12 | (3 & (i >> 3)),
+ .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access,
+ .type = ARM_CP_IO,
+ .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn,
+ .raw_writefn = pmevtyper_rawwrite },
+ REGINFO_SENTINEL
+ };
+ define_arm_cp_regs(cpu, pmev_regs);
+ g_free(pmevcntr_name);
+ g_free(pmevcntr_el0_name);
+ g_free(pmevtyper_name);
+ g_free(pmevtyper_el0_name);
+ }
+ if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4 &&
+ FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) != 0xf) {
+ ARMCPRegInfo v81_pmu_regs[] = {
+ { .name = "PMCEID2", .state = ARM_CP_STATE_AA32,
+ .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 4,
+ .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
+ .resetvalue = extract64(cpu->pmceid0, 32, 32) },
+ { .name = "PMCEID3", .state = ARM_CP_STATE_AA32,
+ .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5,
+ .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
+ .resetvalue = extract64(cpu->pmceid1, 32, 32) },
+ REGINFO_SENTINEL
+ };
+ define_arm_cp_regs(cpu, v81_pmu_regs);
+ }
+}
+
/* We don't know until after realize whether there's a GICv3
* attached, and that is what registers the gicv3 sysregs.
* So we have to fill in the GIC fields in ID_PFR/ID_PFR1_EL1/ID_AA64PFR0_EL1
@@ -6859,67 +6940,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)
define_arm_cp_regs(cpu, pmovsset_cp_reginfo);
}
if (arm_feature(env, ARM_FEATURE_V7)) {
- /* v7 performance monitor control register: same implementor
- * field as main ID register, and we implement four counters in
- * addition to the cycle count register.
- */
- unsigned int i, pmcrn = 4;
- ARMCPRegInfo pmcr = {
- .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 =
0,
- .access = PL0_RW,
- .type = ARM_CP_IO | ARM_CP_ALIAS,
- .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcr),
- .accessfn = pmreg_access, .writefn = pmcr_write,
- .raw_writefn = raw_write,
- };
- ARMCPRegInfo pmcr64 = {
- .name = "PMCR_EL0", .state = ARM_CP_STATE_AA64,
- .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 0,
- .access = PL0_RW, .accessfn = pmreg_access,
- .type = ARM_CP_IO,
- .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
- .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT),
- .writefn = pmcr_write, .raw_writefn = raw_write,
- };
- define_one_arm_cp_reg(cpu, &pmcr);
- define_one_arm_cp_reg(cpu, &pmcr64);
- for (i = 0; i < pmcrn; i++) {
- char *pmevcntr_name = g_strdup_printf("PMEVCNTR%d", i);
- char *pmevcntr_el0_name = g_strdup_printf("PMEVCNTR%d_EL0", i);
- char *pmevtyper_name = g_strdup_printf("PMEVTYPER%d", i);
- char *pmevtyper_el0_name = g_strdup_printf("PMEVTYPER%d_EL0", i);
- ARMCPRegInfo pmev_regs[] = {
- { .name = pmevcntr_name, .cp = 15, .crn = 14,
- .crm = 8 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7,
- .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS,
- .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn,
- .accessfn = pmreg_access },
- { .name = pmevcntr_el0_name, .state = ARM_CP_STATE_AA64,
- .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 8 | (3 & (i >> 3)),
- .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access,
- .type = ARM_CP_IO,
- .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn,
- .raw_readfn = pmevcntr_rawread,
- .raw_writefn = pmevcntr_rawwrite },
- { .name = pmevtyper_name, .cp = 15, .crn = 14,
- .crm = 12 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7,
- .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS,
- .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn,
- .accessfn = pmreg_access },
- { .name = pmevtyper_el0_name, .state = ARM_CP_STATE_AA64,
- .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 12 | (3 & (i >> 3)),
- .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access,
- .type = ARM_CP_IO,
- .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn,
- .raw_writefn = pmevtyper_rawwrite },
- REGINFO_SENTINEL
- };
- define_arm_cp_regs(cpu, pmev_regs);
- g_free(pmevcntr_name);
- g_free(pmevcntr_el0_name);
- g_free(pmevtyper_name);
- g_free(pmevtyper_el0_name);
- }
ARMCPRegInfo clidr = {
.name = "CLIDR", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1,
@@ -6930,24 +6950,10 @@ void register_cp_regs_for_features(ARMCPU *cpu)
define_one_arm_cp_reg(cpu, &clidr);
define_arm_cp_regs(cpu, v7_cp_reginfo);
define_debug_regs(cpu);
+ define_pmu_regs(cpu);
} else {
define_arm_cp_regs(cpu, not_v7_cp_reginfo);
}
- if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4 &&
- FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) != 0xf) {
- ARMCPRegInfo v81_pmu_regs[] = {
- { .name = "PMCEID2", .state = ARM_CP_STATE_AA32,
- .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 4,
- .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
- .resetvalue = extract64(cpu->pmceid0, 32, 32) },
- { .name = "PMCEID3", .state = ARM_CP_STATE_AA32,
- .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5,
- .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
- .resetvalue = extract64(cpu->pmceid1, 32, 32) },
- REGINFO_SENTINEL
- };
- define_arm_cp_regs(cpu, v81_pmu_regs);
- }
if (arm_feature(env, ARM_FEATURE_V8)) {
/* AArch64 ID registers, which all have impdef reset values.
* Note that within the ID register ranges the unused slots
--
2.20.1
- [PULL 11/52] target/arm: Fix select for aa64_va_parameters_both, (continued)
- [PULL 11/52] target/arm: Fix select for aa64_va_parameters_both, Peter Maydell, 2020/02/21
- [PULL 08/52] target/arm: Flush high bits of sve register after AdvSIMD ZIP/UZP/TRN, Peter Maydell, 2020/02/21
- [PULL 09/52] target/arm: Flush high bits of sve register after AdvSIMD INS, Peter Maydell, 2020/02/21
- [PULL 12/52] target/arm: Remove ttbr1_valid check from get_phys_addr_lpae, Peter Maydell, 2020/02/21
- [PULL 15/52] target/arm: Check aa32_pan in take_aarch32_exception(), not aa64_pan, Peter Maydell, 2020/02/21
- [PULL 13/52] target/arm: Split out aa64_va_parameter_tbi, aa64_va_parameter_tbid, Peter Maydell, 2020/02/21
- [PULL 14/52] target/arm: Add _aa32_ to isar_feature functions testing 32-bit ID registers, Peter Maydell, 2020/02/21
- [PULL 17/52] target/arm: Define and use any_predinv isar_feature test, Peter Maydell, 2020/02/21
- [PULL 16/52] target/arm: Add isar_feature_any_fp16 and document naming/usage conventions, Peter Maydell, 2020/02/21
- [PULL 20/52] target/arm: Use FIELD macros for clearing ID_DFR0 PERFMON field, Peter Maydell, 2020/02/21
- [PULL 18/52] target/arm: Factor out PMU register definitions,
Peter Maydell <=
- [PULL 21/52] target/arm: Define an aa32_pmu_8_1 isar feature test function, Peter Maydell, 2020/02/21
- [PULL 22/52] target/arm: Add _aa64_ and _any_ versions of pmu_8_1 isar checks, Peter Maydell, 2020/02/21
- [PULL 19/52] target/arm: Add and use FIELD definitions for ID_AA64DFR0_EL1, Peter Maydell, 2020/02/21
- [PULL 23/52] target/arm: Stop assuming DBGDIDR always exists, Peter Maydell, 2020/02/21
- [PULL 24/52] target/arm: Move DBGDIDR into ARMISARegisters, Peter Maydell, 2020/02/21
- [PULL 26/52] target/arm: Implement ARMv8.1-PMU extension, Peter Maydell, 2020/02/21
- [PULL 25/52] target/arm: Read debug-related ID registers from KVM, Peter Maydell, 2020/02/21
- [PULL 27/52] target/arm: Implement ARMv8.4-PMU extension, Peter Maydell, 2020/02/21
- [PULL 29/52] target/arm: Correct definition of PMCRDP, Peter Maydell, 2020/02/21
- [PULL 28/52] target/arm: Provide ARMv8.4-PMU in '-cpu max', Peter Maydell, 2020/02/21