[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v3 2/5] hw/char/pl011: add post_load hook for backwards-compatibi
From: |
Evgeny Iakovlev |
Subject: |
[PATCH v3 2/5] hw/char/pl011: add post_load hook for backwards-compatibility |
Date: |
Fri, 20 Jan 2023 16:54:44 +0100 |
Previous change slightly modified the way we handle data writes when
FIFO is disabled. Previously we kept incrementing read_pos and were
storing data at that position, although we only have a
single-register-deep FIFO now. Then we changed it to always store data
at pos 0.
If guest disables FIFO and the proceeds to read data, it will work out
fine, because we read from current read_pos before setting it to 0.
However, to make code less fragile, introduce a post_load hook for
PL011State and move fixup read FIFO state when FIFO is disabled. Since
we are introducing a post_load hook, also do some sanity checking on
untrusted incoming input state.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
---
hw/char/pl011.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/hw/char/pl011.c b/hw/char/pl011.c
index 3fa3b75d04..4df649a064 100644
--- a/hw/char/pl011.c
+++ b/hw/char/pl011.c
@@ -352,10 +352,35 @@ static const VMStateDescription vmstate_pl011_clock = {
}
};
+static int pl011_post_load(void *opaque, int version_id)
+{
+ PL011State* s = opaque;
+
+ /* Sanity-check input state */
+ if (s->read_pos >= ARRAY_SIZE(s->read_fifo) ||
+ s->read_count > ARRAY_SIZE(s->read_fifo)) {
+ return -1;
+ }
+
+ if (version_id < 3 && !pl011_is_fifo_enabled(s)) {
+ /*
+ * Older versions of PL011 didn't ensure that the single
+ * character in the FIFO in FIFO-disabled mode is in
+ * element 0 of the array; convert to follow the current
+ * code's assumptions.
+ */
+ s->read_fifo[0] = s->read_fifo[s->read_pos];
+ s->read_pos = 0;
+ }
+
+ return 0;
+}
+
static const VMStateDescription vmstate_pl011 = {
.name = "pl011",
- .version_id = 2,
+ .version_id = 3,
.minimum_version_id = 2,
+ .post_load = pl011_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT32(readbuff, PL011State),
VMSTATE_UINT32(flags, PL011State),
--
2.34.1