Re: [Simulavr-devel] Further Make problems (SWIG again?)

[nimrodx]

Hi All,

Oleg was right, it is a Python.h! The command below is looking for the 
includes in the wrong directory:

/usr/local/bin/swig -c++ -python -outdir python/ -o 
python/simulavr_wrap.cpp simulavr.i
g++ -I. -I/usr/include/python2.3 python/simulavr_wrap.cpp application.o 
at4433.o at8515.o atmega128.o avrdevice.o avrerror.o avrmalloc.o 
decoder.o decoder_trace.o flash.o gdbserver.o hardware.o helper.o 
hwacomp.o hwad.o hweeprom.o hwextirq.o hwmegaextirq.o hwmegatimer.o 
hwmegatimer0123irq.o hwport.o hwspi.o hwsreg.o hwstack.o hwtimer.o 
hwtimer01irq.o hwuart.o hwwado.o ioregs.o irqsystem.o keyboard.o lcd.o 
memory.o mysocket.o net.o pin.o pinatport.o printable.o rwmem.o scope.o 
serialrx.o serialtx.o systemclock.o trace.o ui.o 
/usr/local/AVR/i686-pc-linux-gnu/avr/lib/libbfd.a 
/usr/local/AVR/lib/libiberty.a -lc -lm -lncurses -shared -o 
python/_simulavr.so

Note that the -I/usr/include/python2.3 is looking for a non-existent 
version. I have python2.4 installed.
How do I set "make" do it knows to go for python2.4 instead?


Thanks for your time,

Matt

nimrodx wrote:
> Hi Oleg, Klaus, and Bill, and other Gurus
>
> Well guys, since restarting, I am getting different error messages! 
> Don't know why, but now I get this....
>
>
> /bin/sh ../libtool --mode=link --tag=CXX g++ -O2 -g -O2   -o 
> kbdgentables  kbdgentables.o  -lncurses
> g++ -O2 -g -O2 -o kbdgentables kbdgentables.o  -lncurses
> ./kbdgentables
> if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H 
> -I/usr/local/AVR/include 
> -I/usr/local/AVR/i686-pc-linux-gnu/avr/include -I../src -I ../src   
> -O2 -g -O2 -MT keyboard.lo -MD -MP -MF ".deps/keyboard.Tpo" -c -o 
> keyboard.lo keyboard.cpp; \
> then mv -f ".deps/keyboard.Tpo" ".deps/keyboard.Plo"; else rm -f 
> ".deps/keyboard.Tpo"; exit 1; fi
> g++ -DHAVE_CONFIG_H -I/usr/local/AVR/include 
> -I/usr/local/AVR/i686-pc-linux-gnu/avr/include -I../src -I ../src -O2 
> -g -O2 -MT keyboard.lo -MD -MP -MF .deps/keyboard.Tpo -c keyboard.cpp  
> -fPIC -DPIC -o .libs/keyboard.o
> g++ -DHAVE_CONFIG_H -I/usr/local/AVR/include 
> -I/usr/local/AVR/i686-pc-linux-gnu/avr/include -I../src -I ../src -O2 
> -g -O2 -MT keyboard.lo -MD -MP -MF .deps/keyboard.Tpo -c keyboard.cpp 
> -o keyboard.o >/dev/null 2>&1
> make[3]: *** [keyboard.lo] Error 1
> make[3]: Leaving directory 
> `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory 
> `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> make[1]: *** [all] Error 2
> make[1]: Leaving directory 
> `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> make: *** [all-recursive] Error 1
>
>
> I am embarrassed to be asking so many questions, and I really do 
> appreciate your suggestions.
>
> I had just restarted today, had made clean and made distclean, and then
> ./configure --prefix=/usr/local/AVR
> then I ran make...and did not get the same errors as when I posted 
> that message.
>
> Beats me. Any ideas?
>
> Thanks,
>
> Matt
>
>
>
> Oleg Batrashev wrote:
> > Hi,
> >
> > I think you cut the wrong place from make output. I suppose you have
> > something like "Python.h not found" earlier in output, because
> > Py_InitModule is declared there.
> >
> > On debian I have this file in python-dev package, and configure runs
> > cleanly without this package. So check (and/or install) development
> > files for python.
> >
> > Oleg
> >
> >
> > On Wed, 2006-08-02 at 13:25 +1000, nimrodx wrote:
> >  
> > > Hi Simulavr Gurus,
> > >
> > > I have compiled and installed the latest development release of swig
> > > 1.3.29.
> > > This has caused the previously mentioned problem with swig (-outdir 
> > > option not available) to disappear.
> > >
> > > Now I have the following error at make time:
> > >
> > > python/simulavr_wrap.cpp: In function `void init_simulavr()':
> > > python/simulavr_wrap.cpp:11934: `SwigMethods' undeclared (first use 
> > > this
> > >    function)
> > > python/simulavr_wrap.cpp:11936: `Py_InitModule' undeclared (first 
> > > use this
> > >    function)
> > > python/simulavr_wrap.cpp:11943: `SWIG_From_int' undeclared (first 
> > > use this
> > >    function)
> > > make[3]: *** [python/_simulavr.so] Error 1
> > > make[3]: Leaving directory 
> > > `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> > > make[2]: *** [all-recursive] Error 1
> > > make[2]: Leaving directory 
> > > `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> > > make[1]: *** [all] Error 2
> > > make[1]: Leaving directory 
> > > `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> > > make: *** [all-recursive] Error 1
> > >
> > > What next?  Do I need a slightly earlier release of swig?
> > >
> > > I think I am making progress here, and I greatly appreciate your help.
> > >
> > > Thanks,
> > >
> > > Matt
> > >
> > >
> > >
> > > _______________________________________________
> > > Simulavr-devel mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/simulavr-devel
> > >     
> >
> >
> >   
>
>
>
> _______________________________________________
> Simulavr-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/simulavr-devel