Re: FW: [Ltib] Qtopia on LPC3250

[Stuart Hughes]

Hi Kevin,

Okay let's wait.  The .spec file is common so it should be possible to
change the patch to something like:

    phy3250|ea3250|fdi3250)
        export EXTRA_QTE_CONFIG=
        if [ -n "$PKG_QTOPIA_WANT_TSLIB" ]
        then
               export EXTRA_QTE_CONFIG="-tslib"
        fi

Regards, Stuart

Kevin Wells wrote:
> Hi Stuart,
> 
>> I didn't see the patch you mention?, is this something I should put into
>> CVS?  should I wait until Chris can confirm if this fixes his build issue.
> 
> Thanks, let's wait for Chris to get it up and running on his board before
> placing it in cvs; just in case I need to make more edits.
> 
> Here is the current patch as applied to dist/lfs-5.1/qtopia/qtopia.spec
> 
> 93c93,97
>        export EXTRA_QTE_CONFIG="-tslib"
> ---
>        export EXTRA_QTE_CONFIG=
>        if [ -n "$PKG_QTOPIA_WANT_TSLIB" ]
>        then
>               export EXTRA_QTE_CONFIG="-tslib"
>        fi
> 
> I might also need to apply this the ea3250 and fdi3250 cases in the spec.
> 
> thanks,
> Kevin
> 
> 
>> -----Original Message-----
>> From: Stuart Hughes [mailto:address@hidden
>> Sent: Wednesday, March 24, 2010 1:38 AM
>> To: Kevin Wells
>> Cc: Chris Westervelt; address@hidden
>> Subject: Re: FW: [Ltib] Qtopia on LPC3250
>>
>> Hi Kevin,
>>
>> As you've found the Qtopia build system is quite hostile, it does keep
>> going even if there are errors.  It's very hard to debug.
>>
>> I didn't see the patch you mention?, is this something I should put into
>> CVS?  should I wait until Chris can confirm if this fixes his build issue.
>>
>> Regards, Stuart
>>
>> Kevin Wells wrote:
>>>
>>> Hi Chris,
>>>
>>>
>>>
>>> I've tested my build on a Ubuntu machine and it always fails with only
>>> the lib directory if
>>>
>>> the mouse is selected, but touch support isn't. It's the same way on my
>>> Fedora machine.
>>>
>>> I don't provide a default config for qt2, but I always use both mouse
>>> and touch when
>>>
>>> building here so I never see the issue. That patch below should of fixed
>>> it unless it's
>>>
>>> soemthing else I'm not seeing.
>>>
>>>
>>>
>>> When some type of error occurs, it seems the Qtopia build scripts just
>>> keep on humming
>>>
>>> along. Most of the time, there is so much output you can't see the error
>>> messages.
>>>
>>>
>>>
>>> I've identified several errors:
>>>
>>> kernel/qwsmouse_qws.cpp:1945: error: forward declaration of 'const
>>> struct ts_sample'
>>>
>>> kernel/qwsmouse_qws.cpp:1946: error: invalid use of undefined type
>>> 'const struct ts_sample'
>>>
>>> kernel/qwsmouse_qws.cpp:1945: error: forward declaration of 'const
>>> struct ts_sample'
>>>
>>> make[1]: ***
>>> [tmp/release-shared-linux--g++-no-keypad/kernel/qwsmouse_qws.o] Error 1
>>>
>>> WARNING: defaultbuttons-arm.conf does not exist.
>>>
>>> You'll see this error if the patch isn't used and the touschreen support
>>> in Qtopia isn't enabled (in the LTIB qtopia menu).
>>>
>>>
>>>
>>> I've also identified some errors related to linking similar to below..
>>>
>>> /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-
>> gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/../../../../arm-none-linux-
>> gnueabi/bin/ld:
>>> skipping incompatible /home/usb10132/dev/ltib/rootfs/usr/lib/libuuid.so
>>> when searching for -luuid
>>>
>>> /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-
>> gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/../../../../arm-none-linux-
>> gnueabi/bin/ld:
>>> skipping incompatible /home/usb10132/dev/ltib/rootfs/usr/lib/libuuid.so
>>> when searching for -luuid
>>>
>>> /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-
>> gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/../../../../arm-none-linux-
>> gnueabi/bin/ld:
>>> cannot find -lqte
>>>
>>> collect2: ld returned 1 exit status
>>>
>>> make[5]: *** [../../../lib/libqpe.so.1.5.3] Error 1
>>>
>>> I'm not sure whats going on with these. Anyone have any ideas here?
>>>
>>>
>>>
>>> Please can you try this..
>>>
>>> Make sure the patch listed previously is installed.
>>>
>>> Remove the qtopia-free-2.2.0 directory in the rpm/BUILD directory if it
>>> exists.
>>>
>>> Run the following command:
>>>
>>>                 ./ltib --force --leavesrc --pkg qtopia
>>>
>>> Does this help?
>>>
>>>
>>>
>>> thanks,
>>>
>>> Kevin
>>>
>>>
>>>
>>>
>>>
>>> *From:* Kevin Wells
>>> *Sent:* Tuesday, March 23, 2010 10:56 AM
>>> *To:* 'Chris Westervelt'; address@hidden
>>> *Subject:* RE: FW: [Ltib] Qtopia on LPC3250
>>>
>>>
>>>
>>>
>>>
>>> Hi Chris,
>>>
>>>
>>>
>>> I'm looking at this issue today. There's something odd happening, but
>>> not in all cases - I guess I'm
>>>
>>> having better luck than others getting this to work.
>>>
>>>
>>>
>>> thanks,
>>>
>>> Kevin
>>>
>>>
>>>
>>> *From:* address@hidden
>>> [mailto:address@hidden *On Behalf Of
>>> *Chris Westervelt
>>> *Sent:* Monday, March 22, 2010 1:41 PM
>>> *To:* address@hidden
>>> *Subject:* FW: FW: [Ltib] Qtopia on LPC3250
>>>
>>>
>>>
>>> Actually I’m building on 9.04
>>>
>>>
>>>
>>> * *
>>>
>>>
>>>
>>> *From:* address@hidden
>>> [mailto:address@hidden *On
>>> Behalf Of *Chris Westervelt
>>> *Sent:* Monday, March 22, 2010 4:25 PM
>>> *To:* address@hidden
>>> *Subject:* FW: FW: [Ltib] Qtopia on LPC3250
>>>
>>>
>>>
>>> Yes I am.  I have an entire custom version of phy3250 for my hardware
>>> that I have been compiling under 9.10 for months.    I just never had a
>>> need for Qtopia until recently because of a new product design.  Is this
>>> the problem?
>>>
>>>
>>>
>>> *Chris Westervelt*
>>>
>>> *Senior Product Development Engineer*
>>>
>>> *Infrasafe, Inc.
>>> 12612 Challenger Pkwy
>>> Suite 300
>>> Orlando, FL
>>> 32826*
>>>
>>> *http://www.infrasafe.com <http://www.infrasafe.com/>
>>> Office:   (407) 926-6983*
>>>
>>> *Mobile: (407) 595-7023
>>> Fax:    (407) 857-1635*
>>> *Notice of Confidentiality:*
>>> This e-mail communication and the attachments hereto, if any, are
>>> intended solely for the information and use of the addressee(s)
>>> identified above and may contain information which is legally privileged
>>> and/or otherwise confidential. If a recipient of this e-mail
>>> communication is not an addressee (or an authorized representative of an
>>> addressee), such recipient is hereby advised that any review,
>>> disclosure, reproduction, re-transmission or other dissemination or use
>>> of this e-mail communication (or any information contained herein) is
>>> strictly prohibited. If you are not an addressee and have received this
>>> e-mail communication in error, please advise the sender of that
>>> circumstance either by reply e-mail or by telephone at (800) 238-2686,
>>> immediately delete this e-mail communication from any computer and
>>> destroy all physical copies of same.**
>>>
>>>
>>>
>>> *From:* Peter Barada [mailto:address@hidden
>>> *Sent:* Monday, March 22, 2010 4:19 PM
>>> *To:* Chris Westervelt
>>> *Cc:* address@hidden
>>> *Subject:* Re: FW: [Ltib] Qtopia on LPC3250
>>>
>>>
>>>
>>> On Mon, 2010-03-22 at 13:13 -0700, Chris Westervelt wrote:
>>>
>>>
>>>
>>> Kevin,
>>>
>>>
>>>
>>> I am able to get a build to complete but there is no opt/bin directory
>> only a lib.  I am using the default build for Phytec LPC3250 with Qtopia2
>> added.  It builds ok with the default compiler version but not really.
>> When I look back into the output, it seems to think that there is nothing
>> to be built for 'all' a common problem I have seen when the compiler does
>> not see an 'all' configuration in the make file.  What is causing this?  I
>> did apply your patch.  Also the fonts return a file format not recognized.
>> I cannot even build the kernel with gcc 3.4.5
>>>
>>>
>>>
>>>
>>> Are you building on Ubuntu-9.10?
>>>
>>>
>>>
>>>
>>>
>>> -----Original Message-----
>>>
>>> From: Kevin Wells [mailto:address@hidden
>>>
>>> Sent: Monday, March 22, 2010 3:11 PM
>>>
>>> To: Chris Westervelt; address@hidden <mailto:address@hidden>
>>>
>>> Subject: RE: [Ltib] Qtopia on LPC3250
>>>
>>>
>>>
>>>
>>>
>>> Hi Chris,
>>>
>>>
>>>
>>> I usually build this package with both mouse and touchscreen support.
>>>
>>> However, it looks like that issue with the missing directories occurs
>>>
>>> when the "[ ] Use touchscreen" option isn't enabled (missing lib).
>>>
>>>
>>>
>>> Can you please try applying this patch to the dist/lfs-5.1/qtopia.spec
>>>
>>> file and then building qtopia 2?
>>>
>>>
>>>
>>> 93c93,97
>>>
>>> <       export EXTRA_QTE_CONFIG="-tslib"
>>>
>>> ---
>>>
>>>>       export EXTRA_QTE_CONFIG=
>>>>       if [ -n "$PKG_QTOPIA_WANT_TSLIB" ]
>>>>       then
>>>>              export EXTRA_QTE_CONFIG="-tslib"
>>>>       fi
>>>
>>>
>>> I'm guessing you just had the USB mouse support enabled, but no
>>>
>>> touchscreen support?
>>>
>>>
>>>
>>> thanks,
>>>
>>> Kevin
>>>
>>>
>>>
>>>
>>>
>>>> -----Original Message-----
>>>> From: address@hidden <mailto:ltib-
>> address@hidden> [mailto:ltib-
>>>> address@hidden
>> <mailto:address@hidden>] On Behalf Of Chris
>> Westervelt
>>>> Sent: Monday, March 22, 2010 9:10 AM
>>>> To: address@hidden <mailto:address@hidden>
>>>> Subject: FW: [Ltib] Qtopia on LPC3250
>>>> Hi Stuart,
>>>> You would think from the list that it was but upon attempting to build
>> it,
>>>> alas I am unable to build it.  I have tried all manner of combinations
>> but
>>>> I just can't get a build.  Perhaps Kevin can pull it down as it sits
>> and
>>>> see if he can find a way to get through it.  The kernel won't build
>> with
>>>> the default board configuration for Phytec with GCC 3.4.5.
>>>> -----Original Message-----
>>>> From: Stuart Hughes [mailto:address@hidden
>>>> Sent: Monday, March 22, 2010 10:17 AM
>>>> To: Chris Westervelt
>>>> Cc: address@hidden <mailto:address@hidden>
>>>> Subject: Re: [Ltib] Qtopia on LPC3250
>>>> Hi Chris,
>>>> I thought this had been resolved?
>>>> http://lists.gnu.org/archive/html/ltib/2009-12/msg00092.html
>>>> I don't recall the problem, maybe someone else on the list has some
>>>> information?
>>>> Regards, Stuart
>>>> Chris Westervelt wrote:
>>>>> Hi Stuart,
>>>>> Do you know if the build for Qtopia on the LPC3250 platforms has been
>>>>> resolved yet .  I tried to build Q2 and it completes however no
>> binaries
>>>>> exist.  I saw where others had tried and failed or made some progress
>>>>> but it seemed like all went quiet after a while on the subject which
>>>>> meant they either succeeded but did not check any patches in or they
>>>>> just gave up. Q4 does not finish building at all but as many have
>> said,
>>>>> is probably too big for most devices anyway.
>>>>> *Chris Westervelt*
>>>>> *Senior Product Development Engineer*
>>>>> *Infrasafe, Inc.
>>>>> 12612 Challenger Pkwy
>>>>> Suite 300
>>>>> Orlando, FL
>>>>> 32826*
>>>>> *http://www.infrasafe.com <http://www.infrasafe.com/>
>>>>> Office:   (407) 926-6983*
>>>>> *Mobile: (407) 595-7023
>>>>> Fax:    (407) 857-1635*
>>>>> *Notice of Confidentiality:*
>>>>> This e-mail communication and the attachments hereto, if any, are
>>>>> intended solely for the information and use of the addressee(s)
>>>>> identified above and may contain information which is legally
>> privileged
>>>>> and/or otherwise confidential. If a recipient of this e-mail
>>>>> communication is not an addressee (or an authorized representative of
>> an
>>>>> addressee), such recipient is hereby advised that any review,
>>>>> disclosure, reproduction, re-transmission or other dissemination or
>> use
>>>>> of this e-mail communication (or any information contained herein) is
>>>>> strictly prohibited. If you are not an addressee and have received
>> this
>>>>> e-mail communication in error, please advise the sender of that
>>>>> circumstance either by reply e-mail or by telephone at (800) 238-
>> 2686,
>>>>> immediately delete this e-mail communication from any computer and
>>>>> destroy all physical copies of same.**
>>>>> ---------------------------------------------------------------------
>> ---
>>>>> _______________________________________________
>>>>> LTIB home page: http://ltib.org
>>>>> Ltib mailing list
>>>>> address@hidden <mailto:address@hidden>
>>>>> http://lists.nongnu.org/mailman/listinfo/ltib
>>>> _______________________________________________
>>>> LTIB home page: http://ltib.org
>>>> Ltib mailing list
>>>> address@hidden <mailto:address@hidden>
>>>> http://lists.nongnu.org/mailman/listinfo/ltib
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> LTIB home page: http://ltib.org
>>>
>>>
>>>
>>> Ltib mailing list
>>>
>>> address@hidden <mailto:address@hidden>
>>>
>>> http://lists.nongnu.org/mailman/listinfo/ltib
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> LTIB home page: http://ltib.org
>>>
>>> Ltib mailing list
>>> address@hidden
>>> http://lists.nongnu.org/mailman/listinfo/ltib