Re: FW: [Ltib] Qtopia on LPC3250

[Stuart Hughes]

Hi Kevin,

As you've found the Qtopia build system is quite hostile, it does keep
going even if there are errors.  It's very hard to debug.

I didn't see the patch you mention?, is this something I should put into
CVS?  should I wait until Chris can confirm if this fixes his build issue.

Regards, Stuart

Kevin Wells wrote:
>  
> 
> Hi Chris,
> 
>  
> 
> I've tested my build on a Ubuntu machine and it always fails with only
> the lib directory if
> 
> the mouse is selected, but touch support isn't. It's the same way on my
> Fedora machine.
> 
> I don't provide a default config for qt2, but I always use both mouse
> and touch when
> 
> building here so I never see the issue. That patch below should of fixed
> it unless it's
> 
> soemthing else I'm not seeing.
> 
>  
> 
> When some type of error occurs, it seems the Qtopia build scripts just
> keep on humming
> 
> along. Most of the time, there is so much output you can't see the error
> messages.
> 
>  
> 
> I've identified several errors:
> 
> kernel/qwsmouse_qws.cpp:1945: error: forward declaration of 'const
> struct ts_sample'
> 
> kernel/qwsmouse_qws.cpp:1946: error: invalid use of undefined type
> 'const struct ts_sample'
> 
> kernel/qwsmouse_qws.cpp:1945: error: forward declaration of 'const
> struct ts_sample'
> 
> make[1]: ***
> [tmp/release-shared-linux--g++-no-keypad/kernel/qwsmouse_qws.o] Error 1
> 
> WARNING: defaultbuttons-arm.conf does not exist.
> 
> You'll see this error if the patch isn't used and the touschreen support
> in Qtopia isn't enabled (in the LTIB qtopia menu).
> 
>  
> 
> I've also identified some errors related to linking similar to below..
> 
> /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/../../../../arm-none-linux-gnueabi/bin/ld:
> skipping incompatible /home/usb10132/dev/ltib/rootfs/usr/lib/libuuid.so
> when searching for -luuid
> 
> /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/../../../../arm-none-linux-gnueabi/bin/ld:
> skipping incompatible /home/usb10132/dev/ltib/rootfs/usr/lib/libuuid.so
> when searching for -luuid
> 
> /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/../../../../arm-none-linux-gnueabi/bin/ld:
> cannot find -lqte
> 
> collect2: ld returned 1 exit status
> 
> make[5]: *** [../../../lib/libqpe.so.1.5.3] Error 1
> 
> I'm not sure whats going on with these. Anyone have any ideas here?
> 
>  
> 
> Please can you try this..
> 
> Make sure the patch listed previously is installed.
> 
> Remove the qtopia-free-2.2.0 directory in the rpm/BUILD directory if it
> exists.
> 
> Run the following command:
> 
>                 ./ltib --force --leavesrc --pkg qtopia
> 
> Does this help?
> 
>  
> 
> thanks,
> 
> Kevin
> 
>  
> 
>  
> 
> *From:* Kevin Wells
> *Sent:* Tuesday, March 23, 2010 10:56 AM
> *To:* 'Chris Westervelt'; address@hidden
> *Subject:* RE: FW: [Ltib] Qtopia on LPC3250
> 
>  
> 
>  
> 
> Hi Chris,
> 
>  
> 
> I'm looking at this issue today. There's something odd happening, but
> not in all cases - I guess I'm
> 
> having better luck than others getting this to work.
> 
>  
> 
> thanks,
> 
> Kevin
> 
>  
> 
> *From:* address@hidden
> [mailto:address@hidden *On Behalf Of
> *Chris Westervelt
> *Sent:* Monday, March 22, 2010 1:41 PM
> *To:* address@hidden
> *Subject:* FW: FW: [Ltib] Qtopia on LPC3250
> 
>  
> 
> Actually I’m building on 9.04
> 
>  
> 
> * *
> 
>  
> 
> *From:* address@hidden
> [mailto:address@hidden *On
> Behalf Of *Chris Westervelt
> *Sent:* Monday, March 22, 2010 4:25 PM
> *To:* address@hidden
> *Subject:* FW: FW: [Ltib] Qtopia on LPC3250
> 
>  
> 
> Yes I am.  I have an entire custom version of phy3250 for my hardware
> that I have been compiling under 9.10 for months.    I just never had a
> need for Qtopia until recently because of a new product design.  Is this
> the problem?
> 
>  
> 
> *Chris Westervelt*
> 
> *Senior Product Development Engineer*
> 
> *Infrasafe, Inc.
> 12612 Challenger Pkwy
> Suite 300
> Orlando, FL
> 32826*
> 
> *http://www.infrasafe.com <http://www.infrasafe.com/>
> Office:   (407) 926-6983*
> 
> *Mobile: (407) 595-7023       
> Fax:    (407) 857-1635*
> *Notice of Confidentiality:*
> This e-mail communication and the attachments hereto, if any, are
> intended solely for the information and use of the addressee(s)
> identified above and may contain information which is legally privileged
> and/or otherwise confidential. If a recipient of this e-mail
> communication is not an addressee (or an authorized representative of an
> addressee), such recipient is hereby advised that any review,
> disclosure, reproduction, re-transmission or other dissemination or use
> of this e-mail communication (or any information contained herein) is
> strictly prohibited. If you are not an addressee and have received this
> e-mail communication in error, please advise the sender of that
> circumstance either by reply e-mail or by telephone at (800) 238-2686,
> immediately delete this e-mail communication from any computer and
> destroy all physical copies of same.**
> 
>  
> 
> *From:* Peter Barada [mailto:address@hidden
> *Sent:* Monday, March 22, 2010 4:19 PM
> *To:* Chris Westervelt
> *Cc:* address@hidden
> *Subject:* Re: FW: [Ltib] Qtopia on LPC3250
> 
>  
> 
> On Mon, 2010-03-22 at 13:13 -0700, Chris Westervelt wrote:
> 
>  
> 
> Kevin,
> 
>  
> 
> I am able to get a build to complete but there is no opt/bin directory only a 
> lib.  I am using the default build for Phytec LPC3250 with Qtopia2 added.  It 
> builds ok with the default compiler version but not really.  When I look back 
> into the output, it seems to think that there is nothing to be built for 
> 'all' a common problem I have seen when the compiler does not see an 'all' 
> configuration in the make file.  What is causing this?  I did apply your 
> patch.  Also the fonts return a file format not recognized.  I cannot even 
> build the kernel with gcc 3.4.5
> 
>  
> 
>  
> 
> Are you building on Ubuntu-9.10?
> 
>  
> 
>  
> 
> -----Original Message-----
> 
> From: Kevin Wells [mailto:address@hidden 
> 
> Sent: Monday, March 22, 2010 3:11 PM
> 
> To: Chris Westervelt; address@hidden <mailto:address@hidden>
> 
> Subject: RE: [Ltib] Qtopia on LPC3250
> 
>  
> 
>  
> 
> Hi Chris,
> 
>  
> 
> I usually build this package with both mouse and touchscreen support.
> 
> However, it looks like that issue with the missing directories occurs
> 
> when the "[ ] Use touchscreen" option isn't enabled (missing lib).
> 
>  
> 
> Can you please try applying this patch to the dist/lfs-5.1/qtopia.spec
> 
> file and then building qtopia 2?
> 
>  
> 
> 93c93,97
> 
> <       export EXTRA_QTE_CONFIG="-tslib"
> 
> ---
> 
>>       export EXTRA_QTE_CONFIG=
> 
>>       if [ -n "$PKG_QTOPIA_WANT_TSLIB" ]
> 
>>       then
> 
>>              export EXTRA_QTE_CONFIG="-tslib"
> 
>>       fi
> 
>  
> 
> I'm guessing you just had the USB mouse support enabled, but no
> 
> touchscreen support?
> 
>  
> 
> thanks,
> 
> Kevin
> 
>  
> 
>  
> 
>> -----Original Message-----
> 
>> From: address@hidden <mailto:address@hidden> [mailto:ltib-
> 
>> address@hidden <mailto:address@hidden>] On Behalf Of Chris Westervelt
> 
>> Sent: Monday, March 22, 2010 9:10 AM
> 
>> To: address@hidden <mailto:address@hidden>
> 
>> Subject: FW: [Ltib] Qtopia on LPC3250
> 
>> 
> 
>> Hi Stuart,
> 
>> 
> 
>> You would think from the list that it was but upon attempting to build it,
> 
>> alas I am unable to build it.  I have tried all manner of combinations but
> 
>> I just can't get a build.  Perhaps Kevin can pull it down as it sits and
> 
>> see if he can find a way to get through it.  The kernel won't build with
> 
>> the default board configuration for Phytec with GCC 3.4.5.
> 
>> 
> 
>> -----Original Message-----
> 
>> From: Stuart Hughes [mailto:address@hidden
> 
>> Sent: Monday, March 22, 2010 10:17 AM
> 
>> To: Chris Westervelt
> 
>> Cc: address@hidden <mailto:address@hidden>
> 
>> Subject: Re: [Ltib] Qtopia on LPC3250
> 
>> 
> 
>> Hi Chris,
> 
>> 
> 
>> I thought this had been resolved?
> 
>> http://lists.gnu.org/archive/html/ltib/2009-12/msg00092.html
> 
>> 
> 
>> I don't recall the problem, maybe someone else on the list has some
> 
>> information?
> 
>> 
> 
>> 
> 
>> Regards, Stuart
> 
>> 
> 
>> Chris Westervelt wrote:
> 
>> > Hi Stuart,
> 
>> >
> 
>> >
> 
>> >
> 
>> > Do you know if the build for Qtopia on the LPC3250 platforms has been
> 
>> > resolved yet .  I tried to build Q2 and it completes however no binaries
> 
>> > exist.  I saw where others had tried and failed or made some progress
> 
>> > but it seemed like all went quiet after a while on the subject which
> 
>> > meant they either succeeded but did not check any patches in or they
> 
>> > just gave up. Q4 does not finish building at all but as many have said,
> 
>> > is probably too big for most devices anyway.
> 
>> >
> 
>> >
> 
>> >
> 
>> > *Chris Westervelt*
> 
>> >
> 
>> > *Senior Product Development Engineer*
> 
>> >
> 
>> > *Infrasafe, Inc.
> 
>> > 12612 Challenger Pkwy
> 
>> > Suite 300
> 
>> > Orlando, FL
> 
>> > 32826*
> 
>> >
> 
>> > *http://www.infrasafe.com <http://www.infrasafe.com/>
> 
>> > Office:   (407) 926-6983*
> 
>> >
> 
>> > *Mobile: (407) 595-7023
> 
>> > Fax:    (407) 857-1635*
> 
>> > *Notice of Confidentiality:*
> 
>> > This e-mail communication and the attachments hereto, if any, are
> 
>> > intended solely for the information and use of the addressee(s)
> 
>> > identified above and may contain information which is legally privileged
> 
>> > and/or otherwise confidential. If a recipient of this e-mail
> 
>> > communication is not an addressee (or an authorized representative of an
> 
>> > addressee), such recipient is hereby advised that any review,
> 
>> > disclosure, reproduction, re-transmission or other dissemination or use
> 
>> > of this e-mail communication (or any information contained herein) is
> 
>> > strictly prohibited. If you are not an addressee and have received this
> 
>> > e-mail communication in error, please advise the sender of that
> 
>> > circumstance either by reply e-mail or by telephone at (800) 238-2686,
> 
>> > immediately delete this e-mail communication from any computer and
> 
>> > destroy all physical copies of same.**
> 
>> >
> 
>> >
> 
>> >
> 
>> >
> 
>> > ------------------------------------------------------------------------
> 
>> >
> 
>> > _______________________________________________
> 
>> > LTIB home page: http://ltib.org
> 
>> >
> 
>> > Ltib mailing list
> 
>> > address@hidden <mailto:address@hidden>
> 
>> > http://lists.nongnu.org/mailman/listinfo/ltib
> 
>> 
> 
>> 
> 
>> _______________________________________________
> 
>> LTIB home page: http://ltib.org
> 
>> 
> 
>> Ltib mailing list
> 
>> address@hidden <mailto:address@hidden>
> 
>> http://lists.nongnu.org/mailman/listinfo/ltib
> 
>  
> 
>  
> 
> _______________________________________________
> 
> LTIB home page: http://ltib.org
> 
>  
> 
> Ltib mailing list
> 
> address@hidden <mailto:address@hidden>
> 
> http://lists.nongnu.org/mailman/listinfo/ltib
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib