[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's
From: |
Robitaille, Michael |
Subject: |
Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's |
Date: |
Mon, 7 Nov 2005 09:09:12 -0700 |
Eric, thanks for your answers they are very helpful
My post
>>I can't get to the web page to see if there is any in inventory. If there
is I will.
I finally broke down and placed an order for the Basix RX board Saturday. I
hope you have some in stock.
My post
>> I did look at the AD9862 and the USRP circuit. I have a connector to
>> make contact to the J666 pins 62 and 60 which feeds the AD9862 VINP_A and
VINN_A.
>> I worked out the interface but can't get past the codes that check for
>> the eeprom on the daughterboard.
Eric's Reply:
>Let me check on that later today.
Looking forward to this information
Eric
> It also supports the "experimental_tx" and "experimental_rx" daughterboard
ID's. Those are for
> experimental use, like yours.
I will check this out.
Mike
- [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/03
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/04
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/04
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/04
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/05
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's,
Robitaille, Michael <=
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/07
- RE: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/08
- RE: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/10
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, address@hidden, 2005/11/11
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, address@hidden, 2005/11/14