[Ltib] RE: Install Dillo Problem

[Kevin Wells]

Hi Vic,

It sounds like something might have been edited in the kernel
config file. You'll need to selected one of the displays in
the kernel config menu in
System Type->Embedded Artists Display Selection -->

Kevin


> -----Original Message-----
> From: Vic [mailto:address@hidden
> Sent: Tuesday, October 05, 2010 9:18 PM
> To: Kevin Wells
> Cc: ltib mail
> Subject: Re: Install Dillo Problem
> 
>  Kevin,
> 
>  Here's a more complete error trace of ./ltib --leavesrc xorg-server
> 
> Thanks,
> vic
> 
> 
>  ...
>  HOSTCC  scripts/bin2c
> scripts/kallsyms.c: In function 'read_symbol':
> scripts/kallsyms.c:112: warning: ignoring return value of 'fgets',
> declared
> with attribute warn_unused_result
>   MKELF   scripts/mod/elfconfig.h
> 
> 
>  ...
>  LD      arch/arm/common/built-in.o
> arch/arm/kernel/return_address.c:61:2: warning: #warning "TODO:
> return_address should use unwind tables"
>   CC      arch/arm/kernel/setup.o
>   CC      arch/arm/mm/iomap.o
>   GEN     usr/initramfs_data.cpio
>   CC      arch/arm/kernel/signal.o
>   CC      arch/arm/mm/fault-armv.o
>   CC      arch/arm/mach-lpc32xx/timer.o
>   AS      usr/initramfs_data.o
>   CC      arch/arm/mm/flush.o
> arch/arm/mm/init.c: In function 'mem_init':
> arch/arm/mm/init.c:678: warning: format '%08lx' expects type 'long
> unsigned
> int', but argument 12 has type 'unsigned int'
>   LD      usr/built-in.o
> 
>  ...
> AS      arch/arm/mm/proc-arm926.o
> arch/arm/kernel/unwind.c:34:2: warning: #warning Your compiler is too
> buggy;
> it is known to not compile ARM unwind support.
> arch/arm/kernel/unwind.c:35:2: warning: #warning Change compiler or
> disable
> ARM_UNWIND option.
>   AS      arch/arm/kernel/debug.o
> 
>  ...
> CC      ipc/util.o
> arch/arm/mach-lpc32xx/ea3250.c: In function 'lpc32xx_clcd_setup':
> arch/arm/mach-lpc32xx/ea3250.c:313: error: 'conn_lcd_panel' undeclared
> (first use in this function)
> arch/arm/mach-lpc32xx/ea3250.c:313: error: (Each undeclared identifier is
> reported only once
> arch/arm/mach-lpc32xx/ea3250.c:313: error: for each function it appears
> in.)
> arch/arm/mach-lpc32xx/ea3250.c: In function 'writeToReg':
> arch/arm/mach-lpc32xx/ea3250.c:377: warning: unused variable 'buf'
> make[1]: *** [arch/arm/mach-lpc32xx/ea3250.o] Error 1
> make: *** [arch/arm/mach-lpc32xx] Error 2
> make: *** Waiting for unfinished jobs....
>   CC      fs/file_table.o
> 
>  ...
>   CC      fs/proc/page.o
>   LD      fs/proc/proc.o
>   LD      fs/nfs/nfs.o
>   LD      fs/proc/built-in.o
>   LD      fs/nfs/built-in.o
>   LD      fs/built-in.o
> error: Bad exit status from /home/user/ltib/tmp/rpm-tmp.13411 (%build)
> 
> 
> RPM build errors:
>     Bad exit status from /home/user/ltib/tmp/rpm-tmp.13411 (%build)
> Build time for kernel-2.6.34-lpc32xx: 201 seconds
> 
> Failed building kernel-2.6.34-lpc32xx
> 
> 
> f_buildrpms() returned an error, exiting
> traceback:
>  main:567
> 
> 
> Started: Tue Oct  5 20:12:24 2010
> Ended:   Tue Oct  5 20:16:01 2010
> Elapsed: 217 seconds
> 
> VERSION          : 10.1.1
> CVS_VERSION      : $Revision: 1.71 $ (Savannah)
> PLATFORM         : ea3250
> GNUTARCH         : arm
> TOOLCHAIN        : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
> TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp
> 
> These packages failed to build:
> kernel-2.6.34-lpc32xx
> 
> Build Failed
> 
> Exiting on error or interrupt
> ----- Original Message -----
> From: "Kevin Wells" <address@hidden>
> To: "Vic" <address@hidden>
> Cc: "ltib mail" <address@hidden>
> Sent: Tuesday, October 05, 2010 10:26 AM
> Subject: RE: Install Dillo Problem
> 
> 
> Hi Vic,
> 
> You'll need to use the 2.6.34 port. It has the changes you need.
> I just did a test build of 2.6.34 with all updates from SVN and
> was able to build the kernel without any errors. Can you post
> your errors?
> 
> You need to apply that patch on the kmode.c file in the
> ./ltib/rpm/BUILD/xorg-server folder unpacked by LTIB. I believe
> you can install the source with './ltib --leavesrc xrog-server'.
> 
> Kevin
> 
> > -----Original Message-----
> > From: Vic [mailto:address@hidden
> > Sent: Tuesday, October 05, 2010 1:28 AM
> > To: Kevin Wells
> > Cc: ltib mail
> > Subject: Re: Install Dillo Problem
> >
> > Kevin,
> >
> > Ok, Just want to confirmto avoid any mistakes. I can't successfully
> > compile
> > in 2.6.34 and so I renamed the /BUILD/2.6.27.8 instead. It doesnt have
> to
> > be
> > on 2.6.34,right?
> >
> > Then the X11 source that I have to install in ubuntu 9.04 MUST to be
> > 7.3,right?
> > Then I should apply your display patch on kmode.c,right?
> >
> > Thanks,
> > Vic
> >
> >
> >
> > ----- Original Message -----
> > From: "Kevin Wells" <address@hidden>
> > To: "Vic" <address@hidden>; <address@hidden>
> > Sent: Monday, October 04, 2010 9:56 AM
> > Subject: RE: Install Dillo Problem
> >
> >
> > Hi Vic,
> >
> > You'll need to do a 'cvs up' in your ltib directory to get
> > the changes. You should also rename or delete the
> > linux-2.6.34 directory in ./rpm/BUILD so the changes will
> > be correctly installed.
> >
> > The easiest way to install the X11 changes is to install the
> > Xorg-server source and then manually apply the changes to
> > the file.
> >
> > Rebuild all and you should be ok. Install a USB mouse into
> > the USB host port, boot your board to Linux, and then....
> >
> > Xfbdev -mouse mouse &
> > export DISPLAY=localhost:0.0
> > dillo &
> >
> > It worked great over here, but the rendering has problems on
> > some pages with some large blank regions. You might be able
> > to get some tuning info from Dillo's website. The performance
> > was quite good.
> >
> > Kevin
> >
> >
> > > -----Original Message-----
> > > From: Vic [mailto:address@hidden
> > > Sent: Sunday, October 03, 2010 8:24 PM
> > > To: address@hidden
> > > Cc: Kevin Wells
> > > Subject: Re: Install Dillo Problem
> > >
> > > Hi Kevin,
> > >
> > > How do I update the SVN code and install the X11 patch?
> > >
> > > Thanks,
> > > Vic
> > >
> > >
> > >
> >
> >
> 
>