[Ltib] Re: Install Dillo Problem

[Vic]

Hi Kevin,

after doing a 'cvs up' and running ./ltib --leavesrc xorg-server, ltib ends 
up with same typical error I get when I compile using 2.6.34 as follows:
...
 CC      fs/proc/page.o
 LD      fs/proc/proc.o
 LD      fs/nfs/nfs.o
 LD      fs/proc/built-in.o
 LD      fs/nfs/built-in.o
 LD      fs/built-in.o
error: Bad exit status from /home/user/ltib/tmp/rpm-tmp.13411 (%build)


RPM build errors:
   Bad exit status from /home/user/ltib/tmp/rpm-tmp.13411 (%build)
Build time for kernel-2.6.34-lpc32xx: 201 seconds

Failed building kernel-2.6.34-lpc32xx


f_buildrpms() returned an error, exiting
traceback:
main:567


Started: Tue Oct  5 20:12:24 2010
Ended:   Tue Oct  5 20:16:01 2010
Elapsed: 217 seconds

VERSION          : 10.1.1
CVS_VERSION      : $Revision: 1.71 $ (Savannah)
PLATFORM         : ea3250
GNUTARCH         : arm
TOOLCHAIN        : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp

These packages failed to build:
kernel-2.6.34-lpc32xx

Build Failed

Exiting on error or interrupt

Thanks,
Vic



----- Original Message ----- 
From: "Kevin Wells" <address@hidden>
To: "Vic" <address@hidden>
Cc: "ltib mail" <address@hidden>
Sent: Tuesday, October 05, 2010 10:26 AM
Subject: RE: Install Dillo Problem


Hi Vic,

You'll need to use the 2.6.34 port. It has the changes you need.
I just did a test build of 2.6.34 with all updates from SVN and
was able to build the kernel without any errors. Can you post
your errors?

You need to apply that patch on the kmode.c file in the
./ltib/rpm/BUILD/xorg-server folder unpacked by LTIB. I believe
you can install the source with './ltib --leavesrc xrog-server'.

Kevin