Re: [Protux-devel] commiting stuff

[Luciano Giordana]

strange, fabio reported that it is running smoothly (at least open smoothly) in 
his PC

the first message (about GL) got my attention. It not from protux or from 
libmustux. It does not
happen here.

I will be checking whatever I can..

[]s


On Saturday 31 May 2003 05:56 am, booker wrote:
> No this don't solved the problem, but I tried another automake version
> which solved the problem in the end.
>
> Summary:
> I changed automake version from 1.4x to automake (GNU automake) 1.6.3,
> uninstalled libmustux, re-compiled libmustux, installed libmustux and
> finally run configure, make, make install in protux dir .... HOORAY!!!! 
> :-)
>
>
> BUT ...... executing Protux failed ....... :-(((
>
>
> address@hidden mustuxlib]$ protux --d1
> Loading required GL library /usr/X11R6/lib/libGL.so.1.2
> ENTERING MustuxApplication (CONSTRUCTOR)
> LEAVING MustuxApplication (CONSTRUCTOR)
> ENTERING Protux (CONSTRUCTOR)
>     ENTERING GlobalProperties.cc::init
>         [ Added property VERSION = 0.17.2  ]
>         [ Added property VERSION = 0.15.3  ]
>         [ Added property HZOOM_LEVEL = 18  ]
>         [ Added property DSP_DEVICE = /dev/dsp  ]
>         [ Added property DEFAULT_NUM_TRACKS = 6  ]
>         [ Added property MINIMUM_MULTITRACKAREA_WIDTH = 740  ]
>         [ Added property MINIMUM_MULTITRACKAREA_HEIGHT = 400  ]
>         [ Added property SPECTROGRAM_WIDTH = 200  ]
>         [ Added property SPECTROGRAM_HEIGHT = 100  ]
>         [ Added property JMB_CLEAR_TIME = 2000  ]
>         [ Added property JMB_HOLD_SENSITIVENESS_FACTOR = 10  ]
>         [ Added property JMB_DOUBLE_PRESS_INTERVAL = 200  ]
>         [ Added property SLICE_WIDTH_FACTOR = 1  ]
>         [ Added property MP3_DECODE_COMMAND = mpg123 -w %if  ]
>         [ Added property OGG_DECODE_COMMAND = ogg123 -d wav %if  ]
>         [ Added property MP3_ENCODE_COMMAND = notlame -b320 %if  ]
>         [ Added property OGG_ENCODE_COMMAND = oggenc -b320 %if  ]
>         [ Added property DEFAULT_SAMPLE_RATE = 48000  ]
>         [ Added property DEFAULT_BIT_DEPTH = 24  ]
>     LEAVING GlobalProperties.cc::init
>     ENTERING MustuxAudioDeviceMapper.cc::init
>         [ Found ALSA supported Card : EMU10K1 - Sound Blaster Live! ]
>         [ PLABACK Bus 0 [ card 0 ] : "EMU10K1 - 1st OUT (hw:0,3)" created ]
>         [ CAPTURE Bus 0 [ card 0 ] : "EMU10K1 - 1st IN (hw:0,2)" created ]
>         [ CAPTURE Bus 1 [ card 0 ] : "EMU10K1 - 2nd IN (hw:0,1)" created ]
>         [ PLABACK Bus 1 [ card 0 ] : "EMU10K1 - 2nd OUT (hw:0,0)" created ]
>         [ CAPTURE Bus 2 [ card 0 ] : "EMU10K1 - 3rd IN (hw:0,0)" created ]
>
>         [ Probing CAPTURE Buses
> ------------------------------------------------ ]
>         [       Probing valid modes for bus  0:0 ... ]
>         [          Trying 22050 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 22050 Hz 2 channels 16 bits ... FAILED :  ]
>         [          Trying 32000 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 32000 Hz 2 channels 16 bits ... FAILED :  ]
>         [          Trying 44100 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 44100 Hz 2 channels 16 bits ... FAILED :  ]
>         [          Trying 44100 Hz 1 channels 24 bits ... FAILED :  ]
>         [          Trying 44100 Hz 2 channels 24 bits ... FAILED :  ]
>         [          Trying 48000 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 48000 Hz 2 channels 16 bits ... OK ]
>         [          Trying 48000 Hz 1 channels 24 bits ... FAILED :  ]
>         [          Trying 48000 Hz 2 channels 24 bits ... FAILED :  ]
>         [          Trying 96000 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 96000 Hz 2 channels 16 bits ... FAILED :  ]
>         [          Trying 96000 Hz 1 channels 24 bits ... FAILED :  ]
>         [          Trying 96000 Hz 2 channels 24 bits ... FAILED :  ]
>         [       Probing valid modes for bus  0:1 ... ]
>         [          Trying 22050 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 22050 Hz 2 channels 16 bits ... FAILED :  ]
>         [          Trying 32000 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 32000 Hz 2 channels 16 bits ... FAILED :  ]
>         [          Trying 44100 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 44100 Hz 2 channels 16 bits ... FAILED :  ]
>         [          Trying 44100 Hz 1 channels 24 bits ... FAILED :  ]
>         [          Trying 44100 Hz 2 channels 24 bits ... FAILED :  ]
>         [          Trying 48000 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 48000 Hz 2 channels 16 bits ... FAILED :  ]
>         [          Trying 48000 Hz 1 channels 24 bits ... FAILED :  ]
>         [          Trying 48000 Hz 2 channels 24 bits ... FAILED :  ]
>         [          Trying 96000 Hz 1 channels 16 bits ... FAILED :  ]
>         [          Trying 96000 Hz 2 channels 16 bits ... FAILED :  ]
>         [          Trying 96000 Hz 1 channels 24 bits ... FAILED :  ]
>         [          Trying 96000 Hz 2 channels 24 bits ... FAILED :  ]
>         [       Probing valid modes for bus  0:2 ... ]
>
>
>
>
>
>
> greetings
> Reinhard
>
> Am Samstag, 31. Mai 2003 01:34 schrieb Luciano Giordana:
> > Im not sure, but maybe manually deleting /usr/local/libmustux stuff and
> > /usr/local/bin/[mustux-stuff] and reinstalling it might solve the problem
> >
> > []s
> >
> > On Friday 30 May 2003 07:25 pm, booker wrote:
> > > Am Samstag, 31. Mai 2003 00:16 schrieb Luciano Giordana:
> > > > Im sorry, R, I didnt understand: were you able to compile libmustux?
> > > >
> > > > I commited some changes yesterday and made a fresh checkout,
> > > > everything went fine, but maybe some problems related with my changes
> > > > in  other machines, please let me know if you are able to compile
> > > > everything
> > >
> > > I updated my local trees right now and I'm still able to compile and
> > > install libmustux, but configure for protux still failes, because of
> > > not finding libmustux (see output below).
> > >
> > >
> > > greetings
> > > Reinhard
> > >
> > > > On Friday 30 May 2003 07:02 pm, booker wrote:
> > > > > Am Donnerstag, 29. Mai 2003 23:35 schrieb Martin Herren:
> > > > > > cool... do you know how to close these two bug reports on
> > > > > > savannah ? I don't know how to do it and i think i don't have the
> > > > > > rights to do it... So could you do it ?
> > > > >
> > > > > As far as I remember you can only change the BUG state to solved,
> > > > > for example, but cannot delete it from database.
> > > > >
> > > > > > > ... but failed for protux:
> > > > > >
> > > > > > ...
> > > > > >
> > > > > > > checking if a small qt application compiles and links fine...
> > > > > > > ok checking for mustux-config... /usr/local/bin/mustux-config
> > > > > > > checking for libmustux... /usr/local/lib
> > > > > > > checking for mustux headers... /usr/local/include
> > > > > > > checking for libmustux version >= 0.17.0... yes
> > > > > > > checking if a small mustux application compiles and links
> > > > > > > fine... failed configure: error: there is something wrong with
> > > > > > > your mustux installation address@hidden protux]$
> > > > > >
> > > > > > it doesn't compile for me neither, but it's the compilation that
> > > > > > fails, not the configure script...
> > > > > >
> > > > > > If libmustux compiled and installed successfully, i need the
> > > > > > output of config.log to tell what went wrong... i hope it's not a
> > > > > > f***ing missing vtable again... but can't see anything else right
> > > > > > now... config.log will tell more. And if it's again vtable stuff,
> > > > > > it will be time to fix that problem too.
> > > > >
> > > > > Ok, I've attached the config.log.
> > > > >
> > > > >
> > > > > greetings
> > > > > Reinhard
> > >
> > > _______________________________________________
> > > Protux-devel mailing list
> > > address@hidden
> > > http://mail.nongnu.org/mailman/listinfo/protux-devel
>
> _______________________________________________
> Protux-devel mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/protux-devel

-- 
Best Regards
--
Luciano Giordana - Musician - Certified Java/GNU C++ Developer - Free Software 
Evangelist
Project Mustux - http://www.freesoftware.fsf.org/mustux
-- Once Palladium is up and running , I will become a hacker --