[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Octave from CDROM
From: |
Lukas Richterek |
Subject: |
Re: Octave from CDROM |
Date: |
Fri, 14 Sep 2007 09:11:05 +0200 |
User-agent: |
Mutt/1.5.13 (2006-08-11) |
Dear Michael,
thank You very, very much, it really works!!!
Please, allow me to ask another question connected with the graphics in
octave 2.9.13. So far, I has been using only stable versions 2.1.xx...
If I try "demo" commands such as "peaks(30)" as well as simple mesh or surf
plots, I got only gray plots, but even worse, there is no mesh in fact,
only surface curves in x-direction are plotted, not in the y-direction (I
mean on the monitor, "print -deps" gives the mesh in the eps file). Is it a
problem with gnuplot terminal? How could I change it please? And more --
the hidden3d mode seams to be switched off (also not in eps file).
I know about some matlab commands like "grid on". But are there any
equivalents to
__gnuplot_set__ pm3d at s
__gnuplot_set__ hidden3d
__gnuplot_set__ tics out
__gnuplot_set__ nokey
__gnuplot_set__ nocolorbox
__gnuplot_set__ view map
__gnuplot_set__ decimal_sign ","
__gnuplot_set__ pallete rgbformulae 33,13,10
__gnuplot_raw__ "reset;"
etc.
If I try them, there is no warning, but also no effect, either with
"replot" nor with "gnuplot_command_replot".
As most of my scripts use those "obsolete" commands, at this time I would
prefer to switch on an "old compatibility mode", if possible. But
generally and perspectively, I appreciate any explanation and hint.
Thank You for Your patience and kindness!
Sincerely,
Lukas R.
> I didn't think about the case of console (I don't use it). Indeed, the
> configuration
> file used by console.exe is not relocatable. What you can try instead is
>
> cd Octave\bin
> octave.exe
>
> Michael.
--
Department of Experimental Physics
Fac. Nat. Sciences, Palacky University
17. listopadu 50, Olomouc, 772 00
C z e c h R e p u b l i c
tel.: +420-585 634 103
fax: +420-585 225 737
mobile: +420-728 215 341
e-mail: address@hidden /|||\
http://optics.upol.cz/~richterek/ ( o|o )
----------------------------------- \ u /
- Re: Octave from CDROM, (continued)
- Re: Octave from CDROM, Michael Goffioul, 2007/09/13
- Re: Octave from CDROM, Michael Creel, 2007/09/13
- Re: Octave from CDROM, Tatsuro MATSUOKA, 2007/09/13
- Re: Octave from CDROM, Tatsuro MATSUOKA, 2007/09/13
- Re: Octave from CDROM, John W. Eaton, 2007/09/13
- Re: Octave from CDROM, Tatsuro MATSUOKA, 2007/09/13
- Re: Octave from CDROM, Tatsuro MATSUOKA, 2007/09/15
- Re: Octave from CDROM, Michael Creel, 2007/09/13
- Re: Octave from CDROM, Lukas Richterek, 2007/09/13
- Re: Octave from CDROM, Michael Goffioul, 2007/09/13
- Re: Octave from CDROM,
Lukas Richterek <=
- Re: Octave from CDROM, John W. Eaton, 2007/09/14
Re: Octave from CDROM, Jordi GutiƩrrez Hermoso, 2007/09/12