[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] GNU Radio on Zedboard

From: Tom Rondeau
Subject: Re: [Discuss-gnuradio] GNU Radio on Zedboard
Date: Fri, 13 Mar 2015 14:06:55 -0400

On Fri, Mar 13, 2015 at 1:17 PM, Alireza Khodamoradi <address@hidden> wrote:
Hello everyone,

I'm going through the instructions from here:

to get a working image with gnu radio for my zedboard. 

Unfortunately I can't get the board to boot with this image. I was wondering if someone can help me.

what I tried so far ( all failed - can't boot from the SDCard):

- default settings in the instructions
- renaming u-boot.bin to boot.bin
- renaming u-boot.bin to BOOT.BIN
- renaming uImage--zedboard-zynq7.dtb to devicetree.dtb
- I tried command line as well as gparted gui.

what I checked:

- download a linux from XillyBus and boot the board with SDCard -> works


Can you provide details about how it's not booting? Are you monitoring the boot sequence over the tty connection (/dev/ttyACM0, usually). I've noticed bugs on my system where the u-boot sequence doesn't kick off properly, so I have to go in over the serial connection to actually call 'boot' to get it to run. (I'm sure this problem is something that I've done to myself.)


reply via email to

[Prev in Thread] Current Thread [Next in Thread]