|
From: | Alireza Khodamoradi |
Subject: | Re: [Discuss-gnuradio] GNU Radio on Zedboard |
Date: | Fri, 13 Mar 2015 16:40:06 -0700 |
On Fri, Mar 13, 2015 at 1:17 PM, Alireza Khodamoradi <address@hidden> wrote:Hello everyone,I'm going through the instructions from here:to get a working image with gnu radio for my zedboard.Unfortunately I can't get the board to boot with this image. I was wondering if someone can help me.what I tried so far ( all failed - can't boot from the SDCard):- default settings in the instructions- renaming u-boot.bin to boot.bin- renaming u-boot.bin to BOOT.BIN- renaming uImage--zedboard-zynq7.dtb to devicetree.dtb- I tried command line as well as gparted gui.what I checked:- download a linux from XillyBus and boot the board with SDCard -> worksv/rAlirezaCan you provide details about how it's not booting? Are you monitoring the boot sequence over the tty connection (/dev/ttyACM0, usually). I've noticed bugs on my system where the u-boot sequence doesn't kick off properly, so I have to go in over the serial connection to actually call 'boot' to get it to run. (I'm sure this problem is something that I've done to myself.)Tom
[Prev in Thread] | Current Thread | [Next in Thread] |