Re: ✘gpscsv

[Gary E. Miller]

Yo Andreas!

On Fri, 28 Aug 2020 11:37:48 +0200
Andreas B <panden@gmail.com> wrote:

> I've enabled subframes with
>     ~ # ubxtool -e SFRBX

And you used the proper -P XX setting and you got an ACK?

> but I'm confused how I increase the speed.

See "man gpsctl":

    "-s Set the baud rate at which the GPS emits packets."

So:

    # gpsctl -s 38400

> It's 9600 at the moment,
> and I figured I would try to set it to 38400. Any other
> recommendations? I'm connected with the F9P with USB if it matters.

The F9P has integrated USB, no USB to serial converter involved.  So
no serial port to change the speed of.

> So I try with
>     ubxtool -S 38400

That works too, on a serial port, not an integrated USB port.

> but when I connect to it still says
    [....] "bps":9600 [....]

The driver is pretending it has a speed so as not to confuse older programs
that do not understand.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        gem@rellim.com  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

pgpbmWNNHF1aj.pgp
Description: OpenPGP digital signature